Brother International BAS-612 Instruction Manual - English - Page 33
Corner, Knife, Position, Adjustment
View all Brother International BAS-612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
CORNER KNIFE POSITION ADJUSTMENT • Adjust the corner knife positional correction value to suit the material thickness. The higher the corner knife position is, the father inside the knife is positioned. Ex.: To change the sewing-start value S from 5 to 3 and the sewing-end value E from 5 to 4 1 Set MODE selector 0 to PROGRAM. 2. Press BOBBIN COUNTER - SET switch 0 . The BOBBIN COUNTER SET display will show the corner knife position. 3. Press setter 0 to display 3. 4. Press setter 0 to display 4. 5. Either press BOBBIN COUNTER - SET switch 0 or move MODE selector 0 to any position but PROGRAM, to store the corner knife positional correction data. The correction data remains unmodified if the power switch is set to OFF without these operations. * The corner knife will not operate if the CORNER KNIFE switch is set to ON with the CENTER KNIFE switch set to OFF. LMODE AUTOMATIC MANUAL • PROGRAM • KNIFE CHANGE IL CYCLE PGM. 6=-,\ PROGRAMMING ty NUMBER 12 34 5 0 0 0 0 0 SELECT .- SET - CLEAR CYCLE PGM 69 SEAM n, B0BB N `"-9- LENGTH `="C0UNTER SET BOBBIN COUNTER M/M 5 > SET SELECT O O O NO.1 NO.2 NO.3 Sawing start S > 0 9 Sewing end E 9-- -0 n( SEAM ((mB0BBIN `-'agLENGTH Nc' YC0UNTER SET sol. BOBBIN COUNTER I at M/M S E SET SELECT O O O NO.1 NO.2 NO.3 -29-