Brother International BE-1204C Instruction Manual - English - Page 64

Chapter 3 Embroidering Procedures Register the Machine Name Enter the machine name if the software is run for the first time or when a new machine is connected. 1. Enter a machine name. Select an identifying color for the machine. This color is shown on the title bar for a while when the arrow pointer is moved to the title bar of a machine window. 2. Click [OK]. W1370Q Retrieve the Embroidery Data 1. Click . The embroidery data explorer starts up. 2. Double-click the desired data or click after clicking the desired data. W1371Q 3. The selected data is transferred to the machine controller. W1363Q 4. Click . The data is transferred to the machine for preparation of embroidering. When the embroidery hoop is displayed, the area check is conducted not with the embroidery area but with the frame shape. However, the area check of spider net frame and cap frame is conducted with the embroidery area. Be sure to note that at the time of the area check with the frame shape, the warning message won't be displayed when all of the embroidery data is placed apart from the embroiderable area (in green) in the frame or covers up the whole embroiderable area (in green) of the frame. 3-8 BE-1204B-BC • BE-1206B-BC