Brother International BE-1204C Stand Alone Type Instruction Manual - English - Page 25
Installation, 3-1 Transportation of Machine
View all Brother International BE-1204C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Installation Chapter 1 Preparations of operation DANGER Embroidery machines should be installed only by trained engineers. Electric wiring should be laid by your distributor or electric experts. The sewing machine weights more than 700 Kg (600 Kg in four head models). The installation should be carried out by four or more people. Do not connect the power source until installation is completed. Doing so may start the machine unintentionally through an accidental activation of the START switch, resulting in bodily injuries. Install a machine in a place away from a highfrequency welding machine or other machines that may generate a strong electric noise. Failure to do so may cause the embroidery machine to malfunction. Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur. Secure the machine with the adjustment bolts on the sound floor so that it will not move. After installation is completed, get the power supply from a dedicated outlet. When connecting multiple machines, exercise care not to exceed the capacity of the outlet. 3-1 Transportation of Machine When relocating the machine, push the steel frame. Never push the cover or carriage. ! When using a fork lift The central seal Lift forks W1222Q 1. Viewing the machine from the back, position their center at the central seal, insert the forks under the legs and lift the machine. BE-1204B-BC • BE-1206B-BC 1-5