Brother International BE-1206B Maintenance Schedule - English - Page 1
Brother International BE-1206B Manual
View all Brother International BE-1206B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
BE-1204, 1206 For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Daily Maintenance Cleaning Rotary hook 1. Open bobbin case covers and remove bobbin cases. Use brush to remove lint build up in and around rotary hooks. Compressed air may also be used. Oiling Rotary hook 1. Remove rubber dust plug from the left hand end of machine and insert the red 4mm T-handle wrench. Turn degree wheel in the opposite direction of the arrow to 50 degrees. 2. Insert bobbin cases in to rotary hooks. Make sure bobbin thread is not over 2 inches long. Close bobbin case covers. 2. Open bobbin case covers and insert one drop of oil to the rotary hook raceways. Oil raceways at the beginning and every 3-4 hours of operation. 3. Close bobbin case covers. 4. Rotate degree wheel in the direction of the arrow back to stop position (100 degrees). Remove Thandle wrench and re-install rubber dust plug. 4/8/05 1