Brother International BES-1210AC Color Change Potentiometer Replacement - Engl - Page 1

BAS-416A & 423A BES-1210 & 1230 For Technical Assistance Please Call Toll Free 1-877-4BROTHER Changing the color change potentiometer With the power to the machine turned off. Remove the old color change potentiometer by loosening the two outer setscrews of the color change collar. These are the ones closest to the potentiometer. Then slide the color change potentiometer out of the collar and the machine. You may have to rotate the color change collar to get to both outer setscrews. Setscrews Color change collar Potentiometer Unplug the old color change potentiometer by following the cable out of the potentiometer and unplugging from the connector located on the thread tension connector. You will also need to remove any cable ties or clips to remove the potentiometer from the machine. Please make a note of their location so that after installing the new one they go back in the same place. Thread tension connector Potentiometer connector Potentiometer