Brother International BES-1216AC Instruction Manual - English - Page 25
Lubrication to Needle Bar Case, machine without operation for a long
View all Brother International BES-1216AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 1 Preparation of Embroidery Machine 3-6 Lubrication to Needle Bar Case CAUTION Turn off the power switch before starting any cleaning work, otherwise the machine may operate if the start switch is pressed by mistake, which could result in injury. Proper lubrication is necessary for keeping the machine head in good condition. Before operating the machine for the first time after unpacking or after leaving the machine without operation for a long period of time, supply one or two drops of oil to two sections at the top and the bottom of each needle bar. (See the left figure.) Note) • Use the Brother's specified embroidery machine oil (Nisseki Embroidery Lube No. 10 or the equivalent). • Supplying an excessive amount of oil will cause dripping onto the material. BES-916AC BES-1216AC BES-916AC • BES-1216AC 23