Brother International CE1150 Operation Manual - Page 15

4 Place another foot so that the groove and pin align. Pin Groove Selecting the stitch Press the stitch selection keys to change the stitch number. Selected stitch Presser foot that should be used Note • The presser foot to be used with each stitch appears in the LCD. 5 Slowly lower the presser foot lever so that the presser foot pin snaps into the groove. Removing the presser foot holder Remove the presser foot holder when installing a presser foot that does not use the presser foot holder, such as the walking foot * and quilting foot *. * : Sold separately with some models. ab Stitch selection keys 1 Changes the tens digit of the stitch number. 2 Changes the ones digit of the stitch number. Setting the stitch length and stitch width • Press + or - of the stitch length keys to increase or reduce the stitch length. Loosen. or Presser foot Screwdriver holder Note • When attaching the presser foot holder, hold the presser foot holder in place and tighten the screw. Sewing Basics CAUTION • While the machine is in operation, pay special attention to the needle location. In addition, keep your hands away from all moving parts such as the needle and handwheel, otherwise injuries may occur. • Do not pull or push the fabric too hard while sewing, otherwise injuries may occur or the needle may break. • Never use bent needles. Bent needles can easily break, possibly resulting in injuries. • Make sure that the needle does not strike basting pins, otherwise the needle may break or bend. • Press + or - of the stitch width keys to increase or reduce the stitch width. Memo • If a straight stitch or triple stretch stitch is selected, changing the stitch width changes the needle position. Increasing the width moves the needle to the right; reducing the width moves the needle to the left. Note • The setting value changes until it reaches the maximum or minimum value. • around or disappears when changed from the standard setting. • If "--" appears to the right of , the stitch width cannot be adjusted. 15