Brother International CS-80 Users Manual - English - Page 5

Operation buttons - sewing machine bobbins

Get Brother International CS-80 PDF manuals and user guides View all Brother International CS-80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

S2_brotherE.book Page D Thursday, February 13, 2003 11:03 AM Operation buttons The operation buttons help you to easily perform various basic sewing machine operations. 1 2 3 7 6 5 4 1 Thread cassette indicator The indicator lights up or goes off depending on the condition of the sewing machine. Green: A thread cassette can be inserted. Red: A thread cassette cannot be inserted. Off: The sewing machine has been turned off or a thread cassette is already inserted. 2 Thread cutter button (Only for models equipped with the thread cutter button) Press the thread cutter button after stopping sewing to cut both the upper and the bobbin threads. For details, refer to "Cutting the thread" (page 49). 3 Needle position button Press the needle position button to raise or lower the needle. Pressing the button twice sews one stitch. 4 Start/stop button Press the start/stop button to start or stop sewing. The machine sews at a slow speed at the beginning of sewing while the button is depressed. When sewing is stopped, the needle is lowered in the fabric. For details, refer to "Starting to sew" (page 45). 5 Presser foot lever Raise and lower the presser foot lever to raise and lower the presser foot. 6 Reverse/reinforcement stitch button Press the reverse/reinforcement stitch button to sew reverse stitches or reinforcement stitches. Reverse stitches are sewn by keeping the button pressed down to sew in the opposite direction. Reinforcement stitches are sewn by sewing 3 to 5 stitches on top of each other. For details, refer to "Securing the stitching" (page 47). 7 Sewing speed controller Slide the sewing speed controller to adjust the sewing speed. CAUTION G Do not press the thread cutter button after the threads have already been cut, otherwise the needle may break, the threads may become tangled or damage to the machine may occur. Note G Do not press the thread cutter button if there is no fabric under the presser foot or while the machine is sewing, otherwise damage to the machine may occur. G When cutting thread thicker than #30, nylon thread or other special threads, use the thread cutter on the side of the machine. For details, refer to "Cutting the thread" (page 49). Cover D

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
Cover D
Operation buttons
The operation buttons help you to easily perform various basic sewing machine operations.
1
Thread cassette indicator
The indicator lights up or goes off depending on the
condition of the sewing machine.
Green:
A thread cassette can be inserted.
Red:
A thread cassette cannot be inserted.
Off:
The sewing machine has been turned off
or a thread cassette is already inserted.
2
Thread cutter button
(Only for models equipped
with the thread cutter button)
Press the thread cutter button after stopping sewing to
cut both the upper and the bobbin threads. For details,
refer to
“
Cutting the thread
”
(page 49).
3
Needle position button
Press the needle position button to raise or lower the
needle. Pressing the button twice sews one stitch.
4
Start/stop button
Press the start/stop button to start or stop sewing. The
machine sews at a slow speed at the beginning of
sewing while the button is depressed. When sewing is
stopped, the needle is lowered in the fabric. For details,
refer to
“
Starting to sew
”
(page 45).
5
Presser foot lever
Raise and lower the presser foot lever to raise and lower
the presser foot.
6
Reverse/reinforcement stitch button
Press the reverse/reinforcement stitch button to sew
reverse stitches or reinforcement stitches. Reverse
stitches are sewn by keeping the button pressed down to
sew in the opposite direction. Reinforcement stitches
are sewn by sewing 3 to 5 stitches on top of each other.
For details, refer to
“
Securing the stitching
”
(page 47).
7
Sewing speed controller
Slide the sewing speed controller to adjust the sewing
speed.
Note
●
Do not press the thread cutter button if there
is no fabric under the presser foot or while
the machine is sewing, otherwise damage to
the machine may occur.
●
When cutting thread thicker than #30,
nylon thread or other special threads, use
the thread cutter on the side of the machine.
For details, refer to
“
Cutting the thread
”
(page 49).
1
2
3
4
5
6
7
●
Do not press the thread cutter button after
the threads have already been cut, otherwise
the needle may break, the threads may
become tangled or damage to the machine
may occur.
CAUTION
S2_brotherE.book
Page D
Thursday, February 13, 2003
11:03 AM