Brother International CS-8150 Users Manual - English - Page 100
Satin stitching, settings key in the operation panel.
View all Brother International CS-8150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
UTILITY STITCHES CONTENTS Satin stitching A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller. Connect the foot controller. 1 • For details, refer to "Starting to sew" (page 51). Attach zigzag foot "J". 2 J Select stitch 60 . 8 • For details, refer to "Selecting stitching" (page 66). While sewing, slide the sewing speed 9 controller to adjust the stitch width. Slide the controller to the left to make the width narrower. Slide the controller to the right to make the width wider. Narrower Wider GETTING READY SEWING BASICS UTILITY STITCHES • For details, refer to "Replacing the presser foot" (page 41). Turn on the sewing machine, and then press 3 (settings key) in the operation panel. X The settings screen appears. Press , , and 4 is selected. (arrow keys) until • Adjust the sewing speed with the foot controller. When you are finished sewing, set the stitch 0 width control setting back to OFF. Press 5 (OK key). X The screen for specifying that the stitch width can be controlled with the sewing speed controller appears. Press to select . 6 To return to , press . Memo ● Although the stitching result differs depending on the type of fabric being sewn and the thickness of the thread being used, for best results, adjust the stitch length to between 0.3 and 0.5 mm (1/64 and 1/32 inch). APPENDIX INDEX X The machine is now set so that the stitch width can be controlled with the sewing speed controller. Press 7 (OK key). X The initial stitch screen appears again. 94