Brother International CS-8150 Users Manual - English - Page 34
Threading the needle, up in green.
View all Brother International CS-8150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
GETTING READY SEWING BASICS UTILITY STITCHES GETTING READY Pull the thread under the disc at the front in c the lower-left corner and around to the right, and then cut the thread with the cutter. Follow arrow 6 indicated on the thread cassette. Threading the needle In this section, the procedures for installing the thread cassette and threading the needle are described. The needle threader is used to thread the needle at the same time that the thread cassette is inserted. CONTENTS Memo ● The needle threader can be used with sewing machine needles 75/11 through 100/16. ● Thread with a thickness of 130/20 or less cannot be used with the needle threader. 1 ● The needle threader cannot be used with the wing needle or the twin needle. ● If the needle threader cannot be used, refer 2 to "Threading the needle manually" (page 31). Check that the thread cassette indicator is lit 1 up in green. 1 1 Disc 2 Cutter X The spool of thread is now loaded in the thread cassette. Note ● Be sure to cut the thread as described above, otherwise the needle threader cannot be used to thread the needle. 1 Thread cassette indicator If the thread cassette indicator is lit up in red, the needle has not been raised to the correct position. Press (needle position button) once to raise the needle. APPENDIX INDEX 1 1 Needle position button 28