Brother International DCP 110c Quick Setup Guide - English - Page 8

Step 1 Setting Up the Machine 3 Remove the protective parts. 6 Press firmly down on the ink cartridge until the hook snaps over it, taking care to match the slot color (A) with the cartridge color (B), as shown in the diagram below. Do not throw away the protective parts. You will need them when you transport the machine. 4 Take out the ink cartridge. (B) (A) OK 5 Carefully remove the bottom cap. DO NOT touch the area shown in the illustration below. Opening 7 Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner cover. If Install shows on the LCD after you install the ink cartridges, check to make sure the ink cartridges are installed correctly. If the cartridge cover comes off when you open the bag the cartridge will not be damaged. Keep the ink cartridge in an upright position when you insert it into the slot. OK The machine will clean the ink tube system for use for the first time. This process will occur only once, the first time ink cartridges are installed. The cleaning process will last approximately four minutes. The LCD shows: Preparing System Approx 4 Minutes 6