Brother International DCP-375CW Network Users Manual - English - Page 109
Node Name, Name using BRAdmin Light or BRAdmin Professional 3.
View all Brother International DCP-375CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Control panel setup For Touchscreen models a Press MENU. b Press Network. c (For Wired) Press Wired LAN. (For Wireless) Press WLAN. d Press TCP/IP. e Press Gateway. f Enter the Gateway address. Press OK. g Press Stop/Exit. Node Name 6 6 6 You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRNxxxxxxxxxxxx for a wired network or BRWxxxxxxxxxxxx for a wireless network (where xxxxxxxxxxxx is your machine's Ethernet address) (up to 15 characters). a Press Menu. b Press a or b to choose Network. Press OK. c For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW and MFC-495CW (For Wired) Press a or b to choose Wired LAN. (For Wireless) Press a or b to choose WLAN. Press OK. d Press a or b to choose TCP/IP. Press OK. e Press a or b to choose Node Name. Press OK. f Enter the Node Name. Press OK. Note DCP models cannot change the Node Name from the control panel menu. You can change the Node Name using BRAdmin Light or BRAdmin Professional 3. g Press Stop/Exit. 100