Brother International DCP-375CW Network Users Manual - English - Page 88
the WEP key correctly. The WEP key is case sensitive., but your machine is not found
View all Brother International DCP-375CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW) n Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link Status on the Network Configuration page. Click Next. If your status is "Link OK.", go to step p. If your status is "Failed To Associate", go to step o. 5 Note If you are using WEP and your status is "Link OK." but your machine is not found, make sure you entered the WEP key correctly. The WEP key is case sensitive. o Click Finish. Wireless setup failed as it was unable to associate with a wireless network. This is probably due to incorrect security settings. Reset the print server back to its factory default settings. (See Restoring the network settings to factory default on page 114.) Confirm the security settings of your wireless network and try starting from step d again. 79