Brother International DCP-7065DN Advanced Users Manual - English
Brother International DCP-7065DN Manual
UPC - 012502627128
View all Brother International DCP-7065DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International DCP-7065DN manual content summary:
- Brother International DCP-7065DN | Advanced Users Manual - English - Page 1
ADVANCED USER'S GUIDE DCP-7060D DCP-7065DN HL-2280DW Not all models are available in all countries. Version 0 USA/CAN - Brother International DCP-7065DN | Advanced Users Manual - English - Page 2
to replace consumables. See troubleshooting tips. Advanced User's Guide Learn more advanced operations: Copy, printing reports, and performing routine maintenance. Software User's Guide Follow these instructions for Printing and Scanning (for DCP-7065DN and HL-2280DW). Instructions are included - Brother International DCP-7065DN | Advanced Users Manual - English - Page 3
...1 Ecology features ...1 Toner Save ...1 Sleep Mode ...1 Deep Sleep mode 2 Toner Settings ...2 Toner Setting (Continue Mode 2 LCD Contrast ...3 User Settings List 3 Network Configuration List (DCP-7065DN / HL-2280DW 4 WLAN Report (HL-2280DW only 4 Scanning using a scanner driver 4 2 Making - Brother International DCP-7065DN | Advanced Users Manual - English - Page 4
iii - Brother International DCP-7065DN | Advanced Users Manual - English - Page 5
will not be lost. Temporary settings (for example, Contrast) will be lost. Ecology features 1 1 Toner Save 1 You can save toner using this feature. When you set Toner Save to On, print appears lighter. The default setting is Off. a Press Menu. b Press a or b to choose 1.General Setup and press - Brother International DCP-7065DN | Advanced Users Manual - English - Page 6
key on the control panel. (For HL-2280DW) If a wireless network is enabled, the machine does not enter Deep Sleep mode. To disable the wireless network, see Chapter 3 in the Network User's Guide. Toner Settings 1 Toner Setting (Continue Mode) 1 You can set the machine to continue printing after the - Brother International DCP-7065DN | Advanced Users Manual - English - Page 7
Setup User Settings List 1 You can print a list of the settings you 1 programmed. a Press Menu. b (For DCP-7060D) Press a or b to choose 3.Machine Info. and press OK. (For DCP-7065DN) Press a or b to choose 4.Machine Info. and press OK. (For HL-2280DW) Press a or b to choose 5.Machine Info - Brother International DCP-7065DN | Advanced Users Manual - English - Page 8
. WLAN Report (HL-2280DW only) 1 Prints the result of wireless LAN connectivity diagnosis. a Press Menu. b Press a or b to choose 5.Machine Info.. Press OK. c Press a or b to choose 5.WLAN Report. Press OK. d Press Start. e Press Stop/Exit. Scanning using a scanner driver 1 For information about - Brother International DCP-7065DN | Advanced Users Manual - English - Page 9
quickly change the copy settings temporarily for the next copy, use the temporary COPY keys. You can use different combinations. 2 The machine returns to its default settings one minute after copying. Stop copying 2 To stop copying, press Stop/Exit. 2 2 5 - Brother International DCP-7065DN | Advanced Users Manual - English - Page 10
Press a or b, then press OK Page Quality Auto* 8 Text Photo Graph Stack/Sort Stack* 8 (For DCP-7065DN: Appears Sort when the document is in the ADF) Brightness -onnnn+ 9 -nonnn+ -nnonn+* -nnnon+ -nnnno+ Contrast -onnnn+ 9 -nonnn+ -nnonn+* -nnnon+ -nnnno+ 6 - Brother International DCP-7065DN | Advanced Users Manual - English - Page 11
Press Menu selections Options Enlarge/Reduce 100%* 97% LTRiA4 94% A4iLTR 91% Full Page 85% LTRiEXE 83% LGLiA4 78% LGLiLTR 70% A4iA5 50% Custom(25-400%) Auto 1 200% 141% A5iA4 Page Layout 104% EXEiLTR Off(1 in 1)* 2 in 1 (P) 2 2 in 1 (L) 2 2 in 1 (ID) 4 in 1 (P) 2 4 in 1 (L) 2 - Brother International DCP-7065DN | Advanced Users Manual - English - Page 12
b to choose Auto, Text, Photo or Graph. Press OK. e Press Start. To change the default setting, follow the steps below: a Press Menu. b Press a or b to choose 2.Copy. ratios. To enlarge or reduce the next copy follow the instructions below: a Load your document. b Press a or b to enter the number of - Brother International DCP-7065DN | Advanced Users Manual - English - Page 13
reduction ratio that best fits the size of paper. Auto is only available when using the setting, follow the steps below: a Load your document. b Press a or b to enter the number a darker copy. Press OK. e Press Start. To change the default setting follow the steps below: a Press Menu. b Press a or - Brother International DCP-7065DN | Advanced Users Manual - English - Page 14
copy both sides of an ID card onto one page, see 2 in 1 ID Copy on page 11. IMPORTANT • Please make sure the paper size is set 11. e Press Start to scan the page. (For DCP-7065DN) If you placed the document in the ADF, the machine scans the pages and starts printing. If you are using the scanner - Brother International DCP-7065DN | Advanced Users Manual - English - Page 15
of the card, the LCD will show the following instruction. Turn over the ID Then Press Start e Turn over your identification card and place it at the left side of the scanner glass. f Press Start. The machine scans the other side of the card and prints the page. Note When 2 in 1 ID Copy is chosen - Brother International DCP-7065DN | Advanced Users Manual - English - Page 16
Start to copy the page. (For DCP-7065DN) If you placed the document in the ADF, the machine scans the pages and starts printing. If you are using the scanner glass, go to step e. e After the machine scans the page, press a to scan the next page. Next Page? a Yes b No f Place the next page on - Brother International DCP-7065DN | Advanced Users Manual - English - Page 17
Start to copy the page. (For DCP-7065DN) If you placed the document in the ADF, the machine scans the pages and starts printing. If you are using the scanner glass, go to step e. e After the machine scans the page, press a to scan the next page. Next Page? a Yes b No f Place the next page on - Brother International DCP-7065DN | Advanced Users Manual - English - Page 18
regularly with a dry, lint-free soft cloth. When you replace the toner cartridge or the drum unit, make sure that you clean the inside of the machine AC power outlet. b Pull the paper tray completely out of the machine. Be careful not to inhale toner. IMPORTANT Use neutral detergents. Cleaning with - Brother International DCP-7065DN | Advanced Users Manual - English - Page 19
a dry, lint-free soft cloth 2 to remove dust. Routine maintenance A 3 f Re-load the paper and put the paper tray firmly back in the machine. g Plug the machine's power cord back into the AC power outlet first, connect all cables, and then plug in the telephone line cord. Turn on the machine - Brother International DCP-7065DN | Advanced Users Manual - English - Page 20
switch. Cleaning the corona wire A If you have print quality problems, clean the corona wire as follows: a Open the front cover and leave the machine turned on for 10 minutes to cool down. b Slowly take out the drum unit and toner cartridge assembly. WARNING HOT SURFACE After you have just used - Brother International DCP-7065DN | Advanced Users Manual - English - Page 21
Put the drum unit and toner cartridge assembly back into the machine. Close the front cover. A c Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Cleaning the drum unit A If you have print quality problems, the drum may - Brother International DCP-7065DN | Advanced Users Manual - English - Page 22
NOT put more than one sheet of paper in the manual feed slot at any one time, as it may cause a jam. • If the paper in the manual feed slot is other than A4 or Letter size, the machine will stop the Drum Cleaning process and eject the paper. • Make sure that the paper is straight and in the proper - Brother International DCP-7065DN | Advanced Users Manual - English - Page 23
completion please discard the used paper. If the problem is not solved yet, follow the steps below. a Open the front cover and leave the machine turned on for 10 minutes to cool down. Routine maintenance A b Slowly take out the drum unit and toner cartridge assembly. WARNING HOT SURFACE After - Brother International DCP-7065DN | Advanced Users Manual - English - Page 24
the electrodes shown in the illustration. IMPORTANT • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations below. c Push down the green lock lever and take the toner cartridge out of the drum unit. • To prevent damage to the machine from static electricity - Brother International DCP-7065DN | Advanced Users Manual - English - Page 25
find the exact position of the poor print. Routine maintenance f When you have found the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a dry cotton swab until the dust or glue on the surface comes off. A e Turn the drum unit gear by hand while looking at - Brother International DCP-7065DN | Advanced Users Manual - English - Page 26
pick-up rollers A If you have paper feed problems, clean the pick-up rollers as follows: a Turn off the machine's power switch. Unplug the power cord from the AC power outlet. b Pull the paper tray completely out of the machine. h Put the drum unit and toner cartridge assembly back in the machine - Brother International DCP-7065DN | Advanced Users Manual - English - Page 27
cloth soaked in lukewarm water, and then wipe the separator pad (1) of the paper tray with it to remove dust. Routine maintenance d Wipe the two pick-up rollers (1) inside of the machine to remove dust. A 1 1 e Put the paper tray back in the machine. f Plug the machine's power cord back into the - Brother International DCP-7065DN | Advanced Users Manual - English - Page 28
Press OK. c Press a or b to choose one of the following: 4.Drum Life (DCP-7060D) 5.Drum Life (DCP-7065DN) 6.Drum Life (HL-2280DW) Press OK. d Press Stop/Exit. Note The life check will be accurate only if you have reset the part counter when you installed a new part. It will not be accurate if - Brother International DCP-7065DN | Advanced Users Manual - English - Page 29
be adequately insured with the carrier. • If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts, including the drum unit, the toner cartridges, and printed materials to use with your 'Exchange' machine. a Turn off the machine - Brother International DCP-7065DN | Advanced Users Manual - English - Page 30
i Pack the AC cord and printed materials in the original carton as shown below: FRONT j Close the carton and tape it shut. 26 - Brother International DCP-7065DN | Advanced Users Manual - English - Page 31
and terms that appear in Brother manuals. Availability of these features depends on the model you purchased. ADF (automatic document feeder (For DCP-7065DN)) The document can be placed in the ADF and scanned one page at a time automatically. Cancel Job Cancels a programmed print job and clears the - Brother International DCP-7065DN | Advanced Users Manual - English - Page 32
drum unit 17 paper pick-up rollers 22 scanner 15 Copy 2 in 1 ID Copy 11 brightness 9 contrast 9 Enlarge/Reduce 8 keys 5 N in 1 (page layout 10 Options key 6 quality 8 sort (ADF only 8 temporary settings 5 using ADF 8, 10 using scanner glass 10 D Deep Sleep mode 2 Drum unit checking - Brother International DCP-7065DN | Advanced Users Manual - English - Page 33
Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web http://www.brother.com/ These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.
ADVANCED
USER’S GUIDE
DCP-7060D
DCP-7065DN
HL-2280DW
Not all models are available in all countries.
Version 0
USA/CAN