Brother International DCP-8155DN Quick Setup Guide - English - Page 15
Finish and restart
View all Brother International DCP-8155DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Wired Network Windows® c Choose Wired Network Connection (Ethernet) and then click Next. Note If you want to install the PS driver (BR-Script3 printer driver), choose Custom Install and then follow the on-screen instructions. d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. If you are not using the Windows® Firewall, see the user's guide for your software for information on how to add the following network ports. For network scanning, add UDP port 54925. If you still have trouble with your network connection, add UDP port 161 and 137. e The installation will automatically continue. The installation screens appear one after another. If prompted, follow any on-screen instructions. Important DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear. Note • If prompted, choose your machine from the list, and then click Next. • If your machine is not found over the network, confirm your settings by following the on-screen instructions. • If there is more than one of the same model connected on your network, the IP Address and Node Name will be displayed to help you identify the machine. • You can find your machine's IP address and the node name by printing out the Network Configuration Report. See Print the Network Configuration Report on page 19. • For Windows Vista® and Windows® 7 users, when the Windows Security screen appears, click the check box and click Install to complete the installation correctly. f When the On-Line Registration screen appears, make your selection and follow the on-screen instructions. Once you have completed the registration process, click Next. g When the Setup Complete screen appears, check the box of the action you want to perform, and then click Next. 13 Finish and restart a Click Finish to restart your computer. After restarting the computer, you must log on with Administrator rights. Note • If an error message appears during the software installation, run the Installation Diagnostics located in Start/All Programs/Brother/DCP-XXXX LAN (where DCP-XXXX is your model name). • Depending on your security settings, a Windows® Security or antivirus software window may appear when using the machine or its software. Please allow or permit the window to continue. 15 Windows® Macintosh Wired Network