Brother International DCP-8155DN Quick Setup Guide - English - Page 17
For Wired Network Interface Users, Mac OS X 10.5.8 - 10.7.x, Before you install, Install MFL-Pro
View all Brother International DCP-8155DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Wired Network Macintosh For Wired Network Interface Users (Mac OS X 10.5.8 - 10.7.x) 11 Before you install 12 Install MFL-Pro Suite a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Important For users of Mac OS X 10.5.7 or lower, upgrade to Mac OS X 10.5.8 - 10.7.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.) Note If you want to add the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and visit FAQ's on your model page for instructions. b Remove the protective cap from the Ethernet port marked with a symbol. a Put the installer CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. If prompted, select your model and then follow the on-screen instructions. Important DO NOT cancel any of the screens during the installation. It may take a few minutes for the installation to complete. c Choose your machine from the list, and then click OK. Windows® Macintosh Wired Network c Connect the network interface cable to the Ethernet port and then connect it to a free port on your hub. Note If your machine is not found over the network, confirm your network settings. See Before you install on page 17. d Make sure your machine's power switch is on. 17