Brother International Duetta 2 4750D Users Manual - English - Page 48
Using Threads that Unwind, Quickly, CAUTION
View all Brother International Duetta 2 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
UPPER THREADING j Select a stitch pattern. (Example: ) * Refer to the "STITCH SETTING CHART" at the end of this manual for proper stitch to use with presser foot "J". → The Selected stitch is displayed. Note If the key is light gray after selecting the stitch, the selected stitch cannot be sewn in the twin needle mode. k Press mode. to select the twin needle a Using Threads that Unwind Quickly ■ Using the Spool Net If using transparent nylon thread, metallic thread, or other strong thread, place the included spool net over the spool before using it. When using these threads, threading must be done manually. If the spool net is too long, fold it once to match it to the spool size before placing it over the spool. b a a Spool net b Thread spool c Spool pin d Spool cap dc a Single needle/twin needle setting → appears. CAUTION Be sure to set the twin needle mode when using the twin needle. Using the twin needle while the machine is in single needle mode could cause the needle to break, resulting in damage. l Start sewing. Sample of Twin Needle Sewing Memo • When threading the spool with the spool net on, the thread may not come out enough. Make sure that 5-6 cm (approx. 2 - 2-1/2 inches) of thread are pulled out. • It may be necessary to adjust the thread tension when using the spool net. ■ Using the Vertical Spool Pin Use the vertical spool pin when using an irregularly shaped thread spool, and when sewing or embroidering with metallic thread. a Insert the vertical winder shaft. spool pin onto the bobbin d c a Bobbin winder shaft b Vertical spool pin b c Spool felt d Thread spool a b Install the spool felt and the thread spool that order, and then thread the upper in thread. Memo • When setting the thread spool, set it so that the thread winds off from the front of the spool. • If using metallic thread, we recommend that you use a 90/14 home sewing machine needle. • This method keeps the thread from twisting as it comes off the spool pin. 36