Brother International Duetta 4500D Software Users Manual/4.0 Operation Manual - Page 11

d Use to align the needle position with the point of the thread mark. f Embroider the next pattern. To continue embroidering a repeating pattern, repeat the procedure starting with "Removing the Border Embroidery Frame". CAUTION • If the sewing machine is turned off, then turned on again with the border embroidery frame attached or if you try to select a stitch from the Utility Stitch screen or the Character/Decorative Stitch screen while the border embroidery frame is attached, the following message appears. If the border embroidery frame is not fully removed from the embroidery unit at this time, the border embroidery frame may be hit by the presser foot when the carriage of the embroidery unit is moved. When the following message appears, fully remove the border embroidery frame. a a Needle position Note • After turning the handwheel to check the needle position, press the "Needle Position" button to raise the needle. e After aligning the needle position for the beginning of embroidering, remove the thread mark. Note • Remove the thread mark before starting to embroider. Otherwise, the thread mark stitching may be combined with the pattern stitching. 10