Brother International Entrepreneur PR650e Users Manual - English - Page 119

Creating an Appliqué Piece Appliqué pieces can be created from the built-in patterns and patterns on embroidery cards. This is convenient for fabrics that cannot be embroidered or when you wish to attach an appliqué to a garment. Creating an appliqué piece Touch , and then display page 2/5 1 of the settings screen. The following pattern will be used to create an appliqué piece. Use and to specify the distance 2 between the pattern and the appliqué outline. Note ● Felt or denim fabrics are recommended to make the appliqué piece. Depending on 4 the pattern and fabric used, lighter weight fabrics may cause the stitching to appear smaller. ● For best results, be sure to use stabilizer material for embroidering. ● Select a frame that matches the pattern size. Frame options are displayed on the LCD screen. Memo ● The setting remains selected even if the machine is turned off. ● Finish combining and editing the pattern before selecting the appliqué setting. If the pattern is edited after selecting the appliqué setting, the appliqué stitching Touch to return to the embroidering 3 settings screen. and pattern may become misaligned. ● Since an outline is added, the pattern for an appliqué piece (when the appliqué setting is selected) will be larger than the original pattern. First, adjust the size and position of the pattern as shown below. 1 Embroidering area 2 Approx. 10 mm 3 Pattern size Creating an Appliqué Piece 117