Brother International FAX-2820 Users Manual - English - Page 53
Setting the Ring Volume, Menu/Set, Stop/Exit
View all Brother International FAX-2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Setting the Ring Volume 1 Press Menu/Set, 1, 4, 1. 1.RING 2 Press or to select OFF, LOW, MED or HIGH, and then press Menu/Set. 3 Press Stop/Exit. -OR- You can adjust the ring volume when your FAX/MFC is idle. You can turn the ring OFF or you can select a ring volume level. Press or to adjust the volume level. With each key press, the FAX/MFC rings so you can hear the active setting as the LCD shows it. Each key press changes the volume. The new setting will remain until you change it again. Setting the Beeper Volume You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the FAX/MFC beeps every time you press a key or make an error and when fax sending or receiving has finished. 1 Press Menu/Set, 1, 4, 2. 2.BEEPER 2 Press or to select OFF, LOW or HIGH, and then press Menu/Set. 3 Press Stop/Exit. Setting the Speaker Volume 1 Press Menu/Set, 1, 4, 3. 3.SPEAKER 2 Press or to select LOW, MED, HIGH or OFF, and then press Menu/Set. 3 Press Stop/Exit. -OR- If you are using Hook, you can adjust the speaker volume while dialing. You can turn the speaker off or you can select a speaker volume level. The default setting is the lowest volume. Press or to adjust the volume level. With each key press, the volume changes as the LCD shows the active setting. The new setting will remain until you change it again. INITIAL SETUP 4-4