Brother International FAX-2820 Users Manual - English - Page 64
Setup Send, Before You Begin, Using the ADF (Automatic Document Feeder) - paper jams
View all Brother International FAX-2820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
6 Setup Send 6 Before You Begin Before you begin sending faxes, please be sure to read all the instructions and cautions listed below for placing originals in the automatic document feeder. Using the ADF (Automatic Document Feeder) I Documents must be between 5.8 and 8.5 inches wide and between 3.9 and 14.1 inches long. Your machine can scan an image only 8.15 inches wide, regardless of how wide the paper is. Originals are face down I The FAX-2800 and MFC-4800's ADF (automatic document feeder) can hold up to 20 pages, feeding each one individually through the machine. Use standard (17 lb-24 lb) paper when using the ADF. If you're using heavier paper, feed each sheet individually to prevent paper jams. I The FAX-2900 and MFC-3800's ADF can hold up to 30 pages, if you stagger the pages and meet the following conditions: Temperature: Humidity: Paper: 68° F - 86° F (20° C - 30° C) 50% - 70% Xerox 4200 or equivalent (20LB/LTR). I Fan the paper, and then stagger the pages in the ADF as shown: Approx. 1/2 inch I Make sure you insert documents face down, top edge first. I Adjust the paper guides to fit the width of your document. I Open the document tray by pulling it toward you (1), then unfold the extension (2). 6-1 SETUP SEND