Brother International HL-1050 Quick Setup Guide - English - Page 13
Action6: Plug in and Turn on Your Printer, power, READY
View all Brother International HL-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Action 6: Plug in and Turn on Your Printer 1 Plug the power cord into the AC power outlet and the printer power inlet. NOTE The shape of the power cord varies according to the country of destination. 2 Turn on the power switch that is located on the left side of your printer. 3 Drum Alarm PaRpeeardy ToDnaetra 4 Starter Sheet Make sure that the READY lamp is lit after the printer has warmed up (approximately 30 seconds). Make sure that the printer automatically ejects the starter sheet while the printer is warming-up immediately after installing a new drum unit. -11 -
-11 -
Action 6: Plug in and Turn on Your Printer
1
Plug the power cord into the AC power
outlet and the printer power inlet.
NOTE
The shape of the power cord varies
according to the country of destination.
2
Turn on the
power
switch that is located
on the left side of your printer.
3
Drum
Alarm
Ready
Paper
Data
Toner
Make sure that the
READY
lamp is lit after
the printer has warmed up (approximately
30 seconds).
4
Make sure that the printer automatically
ejects the starter sheet while the printer is
warming-up immediately after installing a
new drum unit.
Starter Sheet