Brother International HL-1260E Users Manual - English - Page 153
DEMO TEST PRINT, PRINT CONFIG, The message PRINT FONTS C or PRINT FONTS P appears only
View all Brother International HL-1260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
USER'S GUIDE Notes The message "PRINT FONTS C" or "PRINT FONTS P" appears only when the optional font cartridge/card is installed in the font slot or permanent download fonts are stored in printer memory. • If the optional font cartridge/card is installed, you can print out the list of optional fonts. Since the list shows the ID numbers specific to each optional font, it helps you to select them with the FONT switch. For further information, see "FONT Switch" in Chapter 4 and "FONT CARTRIDGE/CARD, FLASH MEMORY/HDD CARD" in Chapter 5. • If user-defined characters are already downloaded into the printer memory as permanent download fonts, you can print out the list of them. For further information, see "FONT Switch" in Chapter 4 and Technical Reference Manual that is optionally available. 4. Press the SET switch to make the displayed selection effective. The printer prints out the test patterns or lists according to the selected test mode. s When the "DEMO PAGE" mode has been selected, the display shows the following message and the printer starts printing out the demonstration pattern. 06 DEMO PAGE s When the "TEST PRINT" mode has been selected, the display shows the following message and the printer starts printing out the test pattern. 05 TEST PRINT s When the "PRINT CONFIG" mode has been selected, the display shows the following message and the printer starts printing out the list of printer settings. 06 PRINT CONFIG Note The printed list shows the panel switch settings you have made as user settings with the MODE switch. See "SAVE SETTINGS" in Chapter 4. 4-86