Brother International HL-1260E Users Manual - English - Page 86
BaudRate= 9600, CodeType=8 bits, Parity, Stop Bit=1 bits, Xon/Xoff=ON, DTRER =ON, Robust Xon =OFF
View all Brother International HL-1260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
CHAPTER 4 CONTROL PANEL Display Message BaudRate= 9600 CodeType=8 bits Parity =NONE Stop Bit=1 bits Xon/Xoff=ON DTR(ER) =ON (Effective when Xon/Xoff=ON) Robust Xon =OFF (Effective when Xon/Xoff=ON) Parameters Baud rate (Data transfer speed) Code type (Data length) Parity (Data error check) Stop bits (Data separator) Xon/Xoff (Handshake protocol) Data terminal ready (ER) Robust Xon Settings 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 baud 7 bits or 8 bits None, even, or odd 1 or 2 ON: DTR & Xon/Xoff handshake OFF: DTR handshake only ON: Makes DTR (ER) low when the buffer is full. OFF: Does not make DTR (ER) low when the buffer is full. DTR(ER) goes low only when the printer is off-line. ON: Sends Xon while waiting. OFF: Sends Xon once, when the printer status changes from off-line to on-line. s Optional Interface If you have installed a commercial modular input/output (MIO) card in the printer, you can select the optional MIO interface in this mode. If the installed MIO card requires any optional interface settings, they appear under this menu. Set them, referring to the manual of the MIO card. I/F=OPTION Note This setting appears only when the MIO card has been installed. For installation of the MIO card, see "MODULAR I/O CARD" in Chapter 5. 4-19