Brother International HL-1870n Users Manual - English - Page 118
Install the PCB Access Plate., Re-install the Interface Cover.
View all Brother International HL-1870n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
CHAPTER 4 OPTIONS ☛ 6. Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place. (To remove a DIMM, the locks must be released.) Fig. 4-11 ☛ 7. Install the PCB Access Plate. Secure the PCB Access Plate with the two screws. Fig. 4-12 ☛ 8. Re-install the Interface Cover. ☛ 9. Reconnect the interface cable (printer cable) from your computer. Plug the power cord into the AC outlet, and then turn on the power switch. ☛ 10. After you turn on the printer, the current RAM disk size will appear on the LCD. Check it to make sure you added the new memory correctly. 4-15
CHAPTER 4 OPTIONS
4-15
☛
6.
Press the DIMM straight into the slot (press firmly).
Make sure the locks on
each side of the DIMM snap inward into place.
(To remove a DIMM, the locks
must be released.)
Fig. 4-11
☛
7.
Install the PCB Access Plate.
Secure the PCB Access Plate with the two
screws.
Fig. 4-12
☛
8.
Re-install the Interface Cover.
☛
9.
Reconnect the interface cable (printer cable) from your computer.
Plug the
power cord into the AC outlet, and then turn on the power switch.
☛
10.
After you turn on the printer, the current RAM disk size will appear on the
LCD.
Check it to make sure you added the new memory correctly.