Brother International HL 2060 Users Manual - English - Page 112
Card Operation, Format Card
UPC - 012502525325
View all Brother International HL 2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
CHAPTER 4 CONTROL PANEL CARD OPERATION Note • BE SURE TO TURN OFF THE PRINTER POWER SWITCH BEFORE INSTALLING OR REMOVING THE FLASH MEMORY CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED. • The settings in this mode menu are effective only when you have installed a flash memory card or a HDD card in the card slot of the printer and you have selected the HP LaserJet, HP-GL, or BR-Script 2 mode. They do not appear when the printer has no card or is in any other emulation mode. • If you turn the printer off or remove the flash memory card or the HDD card while data is being written onto or deleted from the card, all the data on the card may be lost. • If the write protect switch of the flash memory card or the HDD card is on, this mode menu does not appear. • PCMCIA cards that require a 12 Volt supply can only be fitted into SLOT 2. Be sure to install a commercial flash memory card or HDD card in the card slot of the printer. When you are in this mode menu, you can save macros and fonts in the installed flash memory card or the HDD card. The sub-setting menus displayed in this mode menu vary according to the state of the installed card. When the installed card is not formatted: When you enter this mode menu with the flash memory card or the HDD card installed but not formatted by this printer, you must first format the card. Display Message FORMAT CARD exit Card Operation Format a new flash memory card or HDD card. Exit to CARD OPERATION When the display shows "FORMAT CARD," press the SET switch to format the installed card. After the printer finishes formatting the card, you exit to the "CARD OPERATION" menu. 4-37