Brother International HL 2060 Users Manual - English - Page 119
FORMAT CARD, For font selection, see FONT Switch
UPC - 012502525325
View all Brother International HL 2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
USER'S GUIDE Once you save the download font in the card, you do not need to download the font every time you need it. Since the flash memory card or the HDD card is in the slot of the printer, you can select the saved fonts as "CARD1 FONT" or "CARD2 FONT" with the FONT switch or the font selection command from your software. For font selection, see "FONT Switch" in Chapter 4. You can check the fonts saved on the card by printing the list of fonts with the TEST switch. See "TEST Switch" in Chapter 4. Note When the fonts on the HDD card are selected in a print job, they are copied into the printer RAM. It may tend to cause the printer memory full error because those fonts occupy some RAM space. It is recommended to install optional SIMM to use the downloaded fonts on the HDD card. s Delete When you select "DELETE" and press the SET switch, you can enter the following sub-setting menus to delete macros and fonts or format the installed flash memory card or HDD card: Display Message MACRO ID=##### DATA ID=##### FONT ID=##### FORMAT CARD Delete Menu Delete the selected ID macro. Delete the selected ID data. Delete the selected ID font. Format the flash memory card or the HDD card. • Macro When you press the SET switch at "MACRO ID=#####," the cursor moves to the ID number. The printer prompts you to select the ID number of the macro to be deleted. MACRO ID=##### Select the ID number with the v or w switch and press the SET switch, so that the printer deletes the selected macro. 4-44