Brother International HL-2400CEN Quick Setup Guide - English - Page 3

Step 3 Install the Toner Cartridges Pull off the tape labeled 'REMOVE' from the toner cartridge. After rocking each toner cartridge 3 to 4 times, remove the orange protective cover from the toner cartridges. Install the 4 toner cartridges by sliding each of them into the correct guide. Close the Front Cover. Step 4 Install the Oil Bottle and Fuser Cleaner Release the Fusing unit pressure a little by pushing the Pressure Release Levers to the OPEN position. (1). Pull the orange protective parts fitted between the rollers of the Fusing Unit and remove them (2). Make sure that the Pressure Release Levers are put back to the SET position. Install the Oil Bottle into the Fusing Unit with the label side facing the front of the printer. Set the Fuser Cleaner into the Fusing Unit with the roller side facing you. Lock the Oil Bottle and the Fuser Cleaner in place by turning the Oil Bottle Lock Levers. Close the Top Cover.