Brother International HL-5470DWT Quick Setup Guide - English - Page 30
Macintosh, Wireless Network
View all Brother International HL-5470DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Wireless Network Macintosh Install the Printer Driver for Macintosh 12 Before you install a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Important For users of Mac OS X 10.5.7 or lower, upgrade to Mac OS X 10.5.8 - 10.7.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.) Note If you want to add the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and visit FAQ's on your model page for instructions. 13 Install the printer driver a Put the installer CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. If prompted, select your model. c Choose Wireless Network Connection and then click Next. d Follow the on-screen instructions. Important DO NOT cancel any of the screens during the installation. It may take a few minutes for the installation to complete. Note If your wireless settings fail, the Wireless Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration. 30 e Choose your machine from the list, and then click OK. Note • If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name. • You can find your machine's MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 31. f When this screen appears, click Next. Note When the Brother Support screen appears, make your selection and follow the on-screen instructions. Finish The installation is now complete. Note If you began the wireless setup from step 5 on page 5, go back to step 6 to continue the machine setting.