Brother International HL-5470DWT Network User's Guide - English - Page 26
Configuring your machine when the SSID is not broadcast
View all Brother International HL-5470DWT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T)) Configuring your machine when the SSID is not broadcast 3 a Before configuring your machine we recommend you write down your wireless network settings. You will need this information before you continue with the configuration. Check and record the current wireless network settings. Network name: (SSID) 3 Communication Mode Infrastructure Authentication method Open system Shared key WPA/WPA2-PSK Encryption mode NONE WEP WEP AES TKIP 1 Network key - 1 TKIP is supported for WPA-PSK only. For example: 3 Network name: (SSID) HELLO Communication Mode Infrastructure Authentication method WPA2-PSK Encryption mode AES Network key 12345678 Note If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. b Press a or b to choose Network. Press OK. c Press a or b to choose WLAN. Press OK. d Press a or b to choose Setup Wizard. Press OK. e When WLAN Enable? is displayed, press a to accept. This will start the wireless setup wizard. To cancel, press Cancel. f The machine will search for your network and display a list of available SSIDs. Choose using a or b. Press OK. 20