Brother International HL-630 Users Manual - English
Brother International HL-630 Manual
 |
View all Brother International HL-630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International HL-630 manual content summary:
- Brother International HL-630 | Users Manual - English - Page 1
Brother Laser Printer HL-600 Series User's Guide Click Here for Table of Contents I - Brother International HL-630 | Users Manual - English - Page 2
is recommended that you save and use the original packaging. The Printer should also be adequately insured with the carrier. Warning When shipping the Printer, the DRUM UNIT assembly including the TONER CARTRIDGE must be removed from the Printer and place it in the plastic bag. Failure to remove it - Brother International HL-630 | Users Manual - English - Page 3
Guide (For USA & CANADA Only) For technical and operational assistance, please call: In USA In Canada 1-800-276-7746 (outside California) 714-859-9700 (within California) 1-800-361-6466 If you have comments or suggestions, please write us at: In USA In Canada Printer Customer Support Brother - Brother International HL-630 | Users Manual - English - Page 4
. Windows is a registered trademark of Microsoft in the U.S. and other countries. All other brand and product names mentioned in this User's Guide are registered trademarks of their respective companies. Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual - Brother International HL-630 | Users Manual - English - Page 5
SPECIFICATIONS 2-1 MULTI-PURPOSE SHEET FEEDER 2-4 MANUAL FEED SLOT 2-8 OUTPUT TRAY AND PAPER SUPPORT WIRE 2-10 CHAPTER 3 CONTROL PANEL LAMPS 3-1 READY Lamp 3-1 DATA Lamp 3-2 MANUAL Lamp 3-2 ALARM Lamp 3-2 SWITCHES 3-3 SELECT (RESET) switch 3-3 SELECT Switch 3-3 RESET Switch 3-4 FF/CONT (TEST) switch - Brother International HL-630 | Users Manual - English - Page 6
CHAPTER 5 MAINTENANCE REPLACING THE TONER CARTRIDGE 5-1 REPLACING THE DRUM UNIT 5-5 ADJUSTING THE PRINT DENSITY 5-9 CLEANING THE PRINTER 5-10 Cleaning the Printer Exterior 5-10 Cleaning the Printer Interior and Drum Unit 5-11 REPACKING THE PRINTER 5-14 CHAPTER 6 TROUBLESHOOTING ALARM INDICATIONS AT - Brother International HL-630 | Users Manual - English - Page 7
in accordance with the instructions, may cause harmful interference Brother Industries, Ltd. could void the user's authority to operate the equipment. Laser Safety (For 110-120 V Model Only) This printer is certified as a Class I laser product under the U.S. Department of Health and Human Services - Brother International HL-630 | Users Manual - English - Page 8
marketed in the United States. The label shown on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. MANUFACTURED: BROTHER INDUSTRIES, LTD. 15-1 Naeshiro-cho Mizuho-ku Nagoya, 467 Japan This product complies - Brother International HL-630 | Users Manual - English - Page 9
must be easily accessible. Manufactured at Brother Industries Ltd. Kariya Plant 1-5, Kitajizoyama, ) We, Brother International Europe Ltd., Brother House 1 tame Street, Guide Bridge, Audenshaw BSI Quality Assurance and JQA Quality Assurance. Brother Industries, Ltd., Kariya Plant 1-5, Kitajizoyama - Brother International HL-630 | Users Manual - English - Page 10
USER'S GUIDE IMPORTANT (For U.K. only) If the power cord supplied with this printer is not suitable for your Always replace the fuse cover. Never use a plug with the cover omitted. WARNING - THIS PRINTER MUST BE PROPERLY EARTHED. The wires in the mains cord are cololured in accordance with the - Brother International HL-630 | Users Manual - English - Page 11
and connect it to your computer. 2. Read the Software Setup Guide to set up your computer for your printer by installing the printer driver, fonts and Remote Printer Console Program. 3. Read the User's Guide to get information about the following. • Features and operating environment requirements - Brother International HL-630 | Users Manual - English - Page 12
USER'S GUIDE ABOUT YOUR PRINTER Printer Overview Paper Support Multi-Purpose Sheet Feeder Top Cover Control Panel Paper Guide Manual Feed Slot Output Tray Paper Support Wire Fig. 1-1 Front View RS-422A/RS-232C Serial Interface ON 12 345678 Power Cord Print Density Dial Parallel Interface - Brother International HL-630 | Users Manual - English - Page 13
manual paper loading, so you can also use labels and transparencies. t Windows® Printing The dedicated printer driver and TrueType™-compatible fonts for Microsoft® Windows or Windows version 3.0 or earlier, you can use any of these emulations to operate the printer. The printer also supports Auto- - Brother International HL-630 | Users Manual - English - Page 14
Console software or Windows printer driver supplied with your printer. Sleep Mode Sleep mode automatically reduces power consumption when the printer is not in use. The printer consumes less than 10W when in sleep mode. Low Running Cost The toner cartridge is separate from the Drum Unit. You need - Brother International HL-630 | Users Manual - English - Page 15
. Use a blind or a heavy curtain to protect the printer from direct sunlight when the printer is unavoidably set up near a window. Do not place the printer near devices that contain magnets or generate magnetic fields. Do not subject the printer to strong physical shocks or vibrations. Do not expose - Brother International HL-630 | Users Manual - English - Page 16
USER'S GUIDE 1-6 - Brother International HL-630 | Users Manual - English - Page 17
x 127-356 mm, 2.75-8.5 x 5-14 inches 60-135 g/m2 (16-36 lbs) Sheet Feeder q Manual q q q q q q q Paper Capacity in Feeder Multi-purpose Sheet Feeder : Output Tray : Up to of your printer. We recommend you use label or transparancies which are designed for laser printer. We recommend - Brother International HL-630 | Users Manual - English - Page 18
USER'S GUIDE Before using paper with holes such as organizer sheets, you must baggy construction • Envelopes not sharply creased • Embossed envelopes • Envelopes already printed with a laser printer • Envelopes pre-printed on the inside • Envelopes that cannot be arranged uniformly when placed in - Brother International HL-630 | Users Manual - English - Page 19
Printable Area CHAPTER 2 PAPER HANDLING The figure below shows the physically printable area. Unprintable area Approximately 4 mm(0.16 inch) for any sizes of paper Fig. 2-3 Printable Area 2-3 - Brother International HL-630 | Users Manual - English - Page 20
GUIDE MULTI-PURPOSE SHEET FEEDER The printer has a multi-purpose sheet feeder that can feed plain paper, envelopes and organizer paper. Caution When you use labels, or transparencies for overhead projectors, be sure to use the manual feed slot. See the next section "MANUAL not support your custom - Brother International HL-630 | Users Manual - English - Page 21
CHAPTER 2 PAPER HANDLING Loading Paper into the Feeder To load paper into the feeder, follow these steps. 1. Open the multi-purpose sheet feeder. ( Œ ) 2. Load paper into the multi-purpose sheet feeder with the printing surface face down. ( ) Caution • The feeder can hold up to 200 sheets of - Brother International HL-630 | Users Manual - English - Page 22
the multi-purpose sheet feeder. ( ) Fig. 2-5 Moving the Paper Guide and Closing the Feeder Note If the multi-purpose sheet feeder runs out to cancel the alarm and continue printing. If paper jams in the printer, the ALARM and PAPER lamps also blink. If the error is a paper jam, clear it referring - Brother International HL-630 | Users Manual - English - Page 23
Manual Duplexing) The supplied printer driver for Windows 3.1 enables manual duplex printing. For more information about settings, see the help text of the printer driver. The printer , the driver instructs you to re-insert the paper by a pop-up message on the computer. Follow the instructions on how - Brother International HL-630 | Users Manual - English - Page 24
. • If you do not select manual paper feed and insert a page in the manual feed slot, the printer loads the first page from the manual feed slot and loads the subsequent pages from the multi-purpose sheet feeder. • If your application software does not support your custom paper size, select the - Brother International HL-630 | Users Manual - English - Page 25
slot to the paper width you are using. ( ) Fig. 2-7 Moving the Paper Guide 4. Press the FF/CONT switch. The printer loads the paper from the manual feed slot and starts printing. After the printer ejects the first page, the MANUAL lamp blinks again to alert you to insert the paper. 5. Insert the - Brother International HL-630 | Users Manual - English - Page 26
USER'S GUIDE OUTPUT TRAY AND PAPER SUPPORT WIRE The printer ejects paper with printed surfaces face down into the output tray at the front of the printer. When the output tray is closed, the ejected paper comes out sheet by sheet through the slit at the front. When you open the tray, - Brother International HL-630 | Users Manual - English - Page 27
sleep mode, all lamps including the READY lamp are off. READY Lamp The green READY lamp indicates the current status of the printer. The printer will wake up automatically from sleep mode data is received or a switch is pressed when the power cord is plugged in. Lamp Off r Blinking r£q Blinking - Brother International HL-630 | Users Manual - English - Page 28
paper source or paper feed method. Lamp Off r Blinking r£q Printer status The printer can print continuously by loading paper from the multi-purpose sheet feeder. Manual paper feed is selected and the printer prompts you to insert paper in the manual paper feed slot and press the FF/CONT switch - Brother International HL-630 | Users Manual - English - Page 29
lower switch on the control panel can work as the SELECT or RESET switch. SELECT Switch The SELECT switch turns the printer on-line and off-line alternately. When the printer is on-line, the READY lamp is on. When the printer is off-line, the READY lamp is blinking respectively. If you press - Brother International HL-630 | Users Manual - English - Page 30
'S GUIDE RESET Switch Depress and hold the RESET switch until all four lamps are turned on. The printer is then reset and restored to the user default settings. While the switch is being depressed, the printer ignores any data. If the switch is released before all the lamps are turned on, the reset - Brother International HL-630 | Users Manual - English - Page 31
. After you have printed confidential data, be sure to reset the printer to clear it from the printer's memory. • You can enable or disable this reprint function with the supplied Remote Printer Console program. See the software setup guide for more information about RPC. Sleep Mode Whether the - Brother International HL-630 | Users Manual - English - Page 32
choice. Blinking Lamp Choice ALARM Test sample page READY Print Fonts DATA Print Config MANUAL Print Fonts P Function The printer prints a test sample page. The printer prints a list of the internal fonts of the printer. The printer prints the current settings that configure or set up the - Brother International HL-630 | Users Manual - English - Page 33
can check data errors and problems. To exit from this mode, you have to reset the printer. After resetting, the printer returns to the ready status. Note User settings are the printer settings that you change with the remote printer console program. See the software setup guide for details. 3-7 - Brother International HL-630 | Users Manual - English - Page 34
USER'S GUIDE 3-8 - Brother International HL-630 | Users Manual - English - Page 35
may have been installed by either the factory or dealer. The serial interface board is installed onto the main controller board inside the printer. For the details about installation, see the instruction guide which was provided with the serial interface board. Fig. 4-1 Serial Interface Board 4-1 - Brother International HL-630 | Users Manual - English - Page 36
USER'S GUIDE Selecting the RS-422A (Apple) or RS-232C (IBM) Serial Interface Note This section is only for printer models which (Apple) for PCs that operate with DOS or Windows. If necessary, select the interface type as follow: 1. Make sure that the printer is in the off-line state. 2. Select - Brother International HL-630 | Users Manual - English - Page 37
Printer Icon (for Windows application software only), or within your AUTOEXEC.BAT file using MODE commands. For information on serial interface parameters, see the user's guide of your computer or software. If necessary, set the serial interface parameters as follow: 1. Make sure that the printer - Brother International HL-630 | Users Manual - English - Page 38
USER'S GUIDE Table 1: Serial Interface Parameters Settings Selector 1 2 3 4 5 6 7 8 Parameters are indicated in bold. • If the robust Xon setting is turned on with selector 8, the printer sends Xon signals at one second intervals to the connected computer until it receives data. It is effective - Brother International HL-630 | Users Manual - English - Page 39
dealer. You can connect a parallel and a serial interface cable at the same time. The auto interface selection function allows you to share the printer with two computers. To do this, connect the parallel interface cable and then connect the serial interface cable as follows: 1. Make sure that the - Brother International HL-630 | Users Manual - English - Page 40
memory board on the 1.0 MB model, the printer can recognize and use only 2 MB memory. Fig. 4-4 Memory Board The memory board is installed onto the main controller board inside the printer. For the installation details, please see the Instruction guide which was provided with the memory board. 4-6 - Brother International HL-630 | Users Manual - English - Page 41
are not sure of them, consult your local dealer. • It is recommended that you clean the printer at the same time as you replace the toner cartridge. See "CLEANING THE PRINTER" in this chapter. Fig. 5-1 Toner Low and Empty Indication Caution You may print approximately 100 pages after the first - Brother International HL-630 | Users Manual - English - Page 42
USER'S GUIDE Follow these steps to replace the toner cartridge: 1. Lift the multi-purpose sheet feeder to remove it. Fig. 5-2 Removing the Multi-Purpose Sheet Feeder 2. Gently push the shutter lever all the way to the rear of the printer. Note The toner cartridge cannot be removed unless the - Brother International HL-630 | Users Manual - English - Page 43
it into the printer. If toner cartridges are left unpacked for a long period of time, the toner life is shortened. Warning You can only use a Brother genuine toner cartridge. Using another brand of toner cartridge could void your printer's warranty. Fig. 5-5 Shaking the Toner Cartridge and Remove - Brother International HL-630 | Users Manual - English - Page 44
USER'S GUIDE 5. Install the new toner cartridge into the drum unit inside the printer. Make sure that the v marks are aligned. Fig. 5-6 Installing the Toner Cartridge into the Drum Unit 6. Gently push the shutter lever to the front of the printer until the two arrow marks are aligned with each - Brother International HL-630 | Users Manual - English - Page 45
sure of them, consult your local dealer. Follow these steps to replace the drum unit: 1. Unplug the printer. 2. Remove the multi-purpose sheet feeder. Remove the toner cartridge and keep it in a safe place. See the chapter "REPLACING THE TONER CARTRIDGE" for more information. Fig. 5-8 Removing the - Brother International HL-630 | Users Manual - English - Page 46
USER'S GUIDE 3. Open the top cover and drum cover of the printer. Caution After you have used the printer, some internal parts of the printer are extremely hot. When you open the top cover of the printer, never touch the shaded parts shown in the following diagram. Fig. 5-9 Inside the printer 4. - Brother International HL-630 | Users Manual - English - Page 47
unit immediately before installing it into the printer. If an unpacked drum unit is subjected to direct sunlight or room light, the unit may be damaged. • Handle the toner cartridge and the drum unit carefully as it may contain the toner. If toner scatters and your hands or clothes get dirty, wipe - Brother International HL-630 | Users Manual - English - Page 48
USER'S GUIDE 7. Hold the drum unit flat and install the new drum unit into the printer. Fig. 5-13 Installing the Drum Unit 8. Close the drum cover and press until the locking pegs click into position and then close the top cover. 9. Install the toner cartridge into the drum unit inside the printer - Brother International HL-630 | Users Manual - English - Page 49
5 MAINTENANCE The print density dial is located near the power cord on the back of the printer. You can use it to adjust the amount of toner applied to the paper. When the toner cartridge and drum unit are replaced, or if the operating temperature and humidity are high or low, print conditions - Brother International HL-630 | Users Manual - English - Page 50
USER'S GUIDE CLEANING THE PRINTER Clean the printer exterior and interior periodically. If printed pages get stained with toner, clean the printer interior and drum unit. Warning Before cleaning the printer, unplug the power cord. Cleaning the Printer Exterior Clean the printer exterior as follows: - Brother International HL-630 | Users Manual - English - Page 51
the multi-purpose sheet feeder. 3. Open the top cover of the printer. 4. Open the drum cover. Note After you have used the printer, some internal parts of the printer are extremely hot. When you open the top cover of the printer, never touch the shaded parts shown in the following diagram. Fig - Brother International HL-630 | Users Manual - English - Page 52
Printer Interior Warning • Do not wipe the scanner window with cleaning alcohol (isophorol). • Make sure that the arrow marks on the toner cartridge are aligned with each other before turning the drum unit upside down. See the section "REPLACE THE TONER CARTRIDGE" in Chapter 5. 8. Turn the drum - Brother International HL-630 | Users Manual - English - Page 53
Be sure to position the tab at the home position to the left end of the drum after cleaning. 11. Install the drum unit into the printer. See the section "REPLACING THE DRUM UNIT" in Chapter 5. 12. Close the drum cover and top cover. 13. Install the multi-purpose sheet feeder. See the section "MULTI - Brother International HL-630 | Users Manual - English - Page 54
Unplug the printer from the AC outlet. 2. Remove the multi-purpose sheet feeder and wrap it in the plastic bag. 3. Open the top cover and the drum cover. 4. Remove the drum unit assembly, referring to the previous section. Note Remove the drum unit assembly with the toner cartridge included. Fig - Brother International HL-630 | Users Manual - English - Page 55
paper support wire, and the output tray. 7. Wrap the printer in the plastic bag and place it in the carton box with the Styrofoam. 8. Place the multi-purpose sheet feeder, documents, and drum unit assembly in the carton box as shown below. 9. Close the carton box and tape it. Manuals Drum Unit - Brother International HL-630 | Users Manual - English - Page 56
USER'S GUIDE 5-16 - Brother International HL-630 | Users Manual - English - Page 57
printer automatically recovers from most errors, but you may need to reset the printer printer or install the multipurpose sheet feeder into the printer firmly. Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty. Replace the toner cartridge - Brother International HL-630 | Users Manual - English - Page 58
USER'S GUIDE For errors shown below, the printer indicates an operator call by blinking the ALARM document. • Press the FF/CONT switch to print the data remaining in the printer. • If you use the supplied Windows driver, try again after setting the TrueType mode to 'Print as Graphics' in the PRINT - Brother International HL-630 | Users Manual - English - Page 59
may be damaged, consult your dealer. Note If the printer does not operate as you expect it to, it is recommended that you perform a user reset or factory reset with the switches or unplug the printer. If you still have problems, consult your dealer or our authorized service representative. 6-3 - Brother International HL-630 | Users Manual - English - Page 60
READY DATA MANUAL Service A r q q r Service B q q q r Service C r r r q Service D q r r q Service Call ALARM READY DATA MANUAL Service E0 r q r q Service E1 q q r q Service P r r q q q ON r OFF NV-RAM error q r q q If you see any of these service call indications, reset the printer in - Brother International HL-630 | Users Manual - English - Page 61
PAPER JAMS CHAPTER 6 TROUBLESHOOTING Before you clear the paper jam error, you need to find the location of the paper jams. Locate the position referring to the following figure. Paper Top Cover Multi-Purpose Sheet Feeder Drum Cover Drum Unit Output Tray Fig. 6-1 Locating Paper Jam Position - Brother International HL-630 | Users Manual - English - Page 62
USER'S GUIDE t Paper Jam in the Multi-Purpose Sheet Feeder If a Drum Cover." t Paper Jam under the Drum Cover If a paper jam has occurred under the drum cover, remove the multipurpose sheet feeder, open the top cover and the drum cover. Then, pull the jammed paper upwards and out of the printer - Brother International HL-630 | Users Manual - English - Page 63
CHAPTER 6 TROUBLESHOOTING t Paper Jam Inside the Printer If a paper jam has occurred under the drum unit, you must; remove the multi-purpose sheet feeder, open the top cover and the drum cover, remove the drum unit, and pull the jammed paper out of the printer. Then, re-install the drum unit and - Brother International HL-630 | Users Manual - English - Page 64
removed. • The toner cartridge and drum unit are installed properly. • The interface cable is securely connected between the printer and computer. • Notice if any lamps are blinking. Notice which lamps are blinking and refer to Operator Call section of this manual. Setting up the Printer for DOS - Brother International HL-630 | Users Manual - English - Page 65
problem with database software and spreadsheet software when not correctly set up. The data has been sent to the printer but the printer did printer console (RPC) program. Setting up the Printer for Windows Questions The printer does not work. Recommendation Check the followings: • The printer - Brother International HL-630 | Users Manual - English - Page 66
GUIDE Questions I cannot print from my application software. How can I change the printer's default settings? Sometimes I get a Print Overrun error when printing certain documents from Windows Windows 3.0 or earlier, make sure that proper printer driver is installed and selected to match the printer - Brother International HL-630 | Users Manual - English - Page 67
6 TROUBLESHOOTING Questions I cannot print from my application software. Recommendations • Make sure that the supplied printer driver is page setup or document setup menu of your software. Refer to your application manual. You can use plain paper, envelopes, transparencies, labels, and organizer - Brother International HL-630 | Users Manual - English - Page 68
RPC program or Printer Control Panel. • You may clear the problem by resetting the printer to user or factory settings. See "Reset/Hex Dump Mode" be solved by the following ways. • If you are using Windows 3.1 with the supplied printer driver, set the TrueType mode to 'Print as graphics'. • Reduce - Brother International HL-630 | Users Manual - English - Page 69
interior and the primary corona wire of the toner cartridge. See "Cleaning the Printer Interior and Drum Unit" in Chapter 5. Make sure that the tab of the corona wire is at the home posision. If the same print problem occurs after cleaning, replace the drum unit with a new one. Here come Flat-top - Brother International HL-630 | Users Manual - English - Page 70
media can cause the problem. • If you still have same problem, replace the drum unit with a new one. Fig. 6-9 White Spots Toner scatters and stains the printed page. If toner scatters over the whole printing surface, adjust the print density dial inside the printer anticlockwise. See "ADJUSTING - Brother International HL-630 | Users Manual - English - Page 71
See "Cleaning the printer interior and Drum Unit" in Chapter 5. Never use heat-sensitive paper as it will cause this problem. If the same problem occurs after cleaning, replace the drum unit with a new one. Fig. 6-11 Black Page Nothing is printed on the • Make sure that the toner cartridge is not - Brother International HL-630 | Users Manual - English - Page 72
the following situation to occur. Printed pages are blurred at • Make sure that the printer is placed on a flat, the center or either edge. horizontal surface. • Remove the drum unit with the toner cartridge installed. Hold the unit horizontally with both hands and tap it firmly against a flat - Brother International HL-630 | Users Manual - English - Page 73
at 23°C (73.4°F) First Print 20 seconds (when loading A4-size paper from the multipurpose sheet feeder) Print Media Toner in a cartridge Life Expectancy: 3,000 pages/cartridge (when printing A4- or letter-size paper at 4% print coverage) TrueType Fonts on disks TrueType-compatible soft-fonts - Brother International HL-630 | Users Manual - English - Page 74
USER'S GUIDE Functions CPU Emulation Printer Driver MC68EC000 16 MHz Automatic emulation selection among HP LaserJet IIP (PCL level 4), EPSON FX-850, or IBM Proprinter XL Windows 3.1 driver, supporting Brother Native Compression mode and bi-directional capability Optional Macintosh driver ( - Brother International HL-630 | Users Manual - English - Page 75
APPENDICES PARALLEL INTERFACE SPECIFICATION Interface Connector Pin Assignment Printer Side: Amphenol FCN-685J036-L/X or equivalent A shielded cable should be used. Pin No. Signal 1 DATA STROBE 2 DATA 1 3 DATA 2 4 DATA 3 5 DATA 4 6 DATA 5 7 DATA 6 8 DATA 7 9 DATA 8 10 - Brother International HL-630 | Users Manual - English - Page 76
USER'S GUIDE RESIDENT FONTS The following bitmapped fonts are resident in this printer. Brougham10, 12 point, upright/normal upright/bold italic/normal italic/bold Brougham 12, 10 point upright/normal upright/bold italic/normal italic/bold Letter Gothic - Brother International HL-630 | Users Manual - English - Page 77
to know what characters are in each symbol/character set, print CHARSETS.PRN file from "Print form" option in Direct Access Menu of the Remote Printer Console Program. Appendix-5 - Brother International HL-630 | Users Manual - English - Page 78
USER'S GUIDE t HP LaserJet IIP The following table shows characters available only in the corresponding character set. The numbers at the top of the table are code - Brother International HL-630 | Users Manual - English - Page 79
t HP LaserJet IIP, EPSON FX-850, IBM Propritner XL APPENDICES t EPSON FX-850 Appendix-7 - Brother International HL-630 | Users Manual - English - Page 80
USER'S GUIDE The following table shows characters available only in the corresponding character set. The numbers at the top of the table are code values with which characters are to be replaced in the US ASCII character set. For other characters, see the character set of US ASCII. Appendix-8 - Brother International HL-630 | Users Manual - English - Page 81
3-1-7 cover open 6-1 D DATA lamp 3-2 Density 5-9 DIP switch 4-3-4 drum unit 5-5 drum life 5-5 Duplex 2-7 E economy printing mode 1-4 emulation 1-3 envelopes 2-1-2 environment 1-5 error 3-2, 6-1-13 error recover 3-4 F factory reset 3-7 features 1-3 feeder 2-1-9 FF/CONT switch 3-4 font Appendix-4 font - Brother International HL-630 | Users Manual - English - Page 82
interface 1-4, 4-1-4 serial interface cable 4-5 service calls 6-4 sleep mode 1-4, 3-1, 3-5 switch 3-3-4 symbol set Appendix-5 T test print 3-4, 3-6 test sample page 3-4 TEST switch 3-4 Index-2 toner cartridge 5-1 toner empty 5-1, 6-1 TONER lamp 5-1 toner low 5-1, 6-1 transparency 2-1, 2-8 two side - Brother International HL-630 | Users Manual - English - Page 83
California) 1-800-361-6466 If you have comments or suggestions, please write us at: In USA In Canada Printer Customer Support Brother International Corporation 15 Musick Irvine, CA 92718 Brother International Corporation, Ltd. 1, Rue Hôtel De Ville Dollard-des-Ormeaux P.Q. Canada H9B3H6 III - Brother International HL-630 | Users Manual - English - Page 84
UL5422001 C Printed in Japan IV
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
 |
 |
I
Brother Laser Printer
HL-600 Series
User’s Guide