Brother International HL-630 Users Manual - English - Page 57

Alarm Indications At A Glance - troubleshooting

Get Brother International HL-630 PDF manuals and user guides View all Brother International HL-630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

CHAPTER 6 TROUBLESHOOTING CHAPTER 6 TROUBLESHOOTING ALARM INDICATIONS AT A GLANCE Operator Calls If an error occurs, the printer indicates an 'operator call' by blinking the ALARM lamp and any of the following lamps. Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the switches as described below. Blinking Lamp PAPER r£q ALARMr£q Error Paper jam Paper empty Mis Feed COVER r£q Cover open ALARMr£q TONER r£q Toner low ALARMr£q ( every 5 seconds) TONER r£q Toner Empty ALARMq£q Action Clear the paper jam referring to the next section "PAPER JAMS" and press the FF/CONT switch if the printer does not automatically resume printing. Load paper in the printer referring to Chapter 2 and press the FF/CONT switch. Reinstall the paper and press the FF/CONT switch. Close the top cover of the printer or install the multipurpose sheet feeder into the printer firmly. Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty. Replace the toner cartridge with a new one. 6-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
CHAPTER 6 TROUBLESHOOTING
6–1
CHAPTER 6
TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls
If an error occurs, the printer indicates an ‘operator call’ by blinking the
ALARM lamp and any of the following lamps.
Find the error and take the proper action to correct it. The printer
automatically recovers from most errors, but you may need to reset the
printer with the switches as described below.
Blinking Lamp
Error
Action
PAPER
↔●
ALARM
↔●
Paper jam
Paper empty
Mis Feed
Clear the paper jam referring
to the next section “PAPER
JAMS” and press the
FF/CONT switch if the printer
does not automatically resume
printing.
Load paper in the printer
referring to Chapter 2 and
press the FF/CONT switch.
Reinstall the paper and press
the FF/CONT switch.
COVER
↔●
ALARM
↔●
Cover open
Close the top cover of the
printer or install the multi-
purpose sheet feeder into the
printer firmly.
TONER
↔●
ALARM
↔●
( every 5 seconds)
TONER
↔●
ALARM
●↔●
Toner low
Toner Empty
Indicates that the printer has
approximately 100 pages of
printing left before the toner
cartridge is empty.
Replace the toner cartridge
with a new one.