Brother International HL-631 Users Manual - English - Page 32
Test Print Mode, Print Fonts P
View all Brother International HL-631 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
USER'S GUIDE Test Print Mode The printer has a test print mode where you can select and perform any of three test prints. Follow these steps: 1. Press the SELECT switch to turn the printer off-line. 2. Hold down the FF/CONT switch and press the SELECT switch. The printer enters the test print mode. The ALARM lamp blinks to indicate that the first choice, Test sample page, is selected. See the table below. 3. Press the FF/CONT switch to select another test. Every time you press the switch, the blinking lamp changes to select another choice. See the table below. 4. Press the SELECT switch to perform the selected choice. Blinking Lamp Choice ALARM Test sample page READY Print Fonts DATA Print Config MANUAL Print Fonts P Function The printer prints a test sample page. The printer prints a list of the internal fonts of the printer. The printer prints the current settings that configure or set up the printer. The printer prints a list of the permanent download fonts. After printing the desired test sample page, the printer returns to the ready status. 3-6