Brother International HL-L2305W Command Reference Guide for Software Developer - Page 288
OPMSG Command, STMSG Command
View all Brother International HL-L2305W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
The following is an example of how to restore the display to the normal ready message. %-12345X@PJL @PJL COMMENT Normal READY message @PJL RDYMSG DISPLAY = "" @PJL EOJ NAME = "End of Tom's Job" %-12345X 8.3. OPMSG Command With the OPMSG command, you can display any message you like on the printer switch panel LCD. The printer will go off-line and stop printing until the operator presses the ON LINE key or resets the printer (Press SHIFT key and RESET key, then press SET key.) Syntax @PJL OPMSG DISPLAY = "message" [] Parameters Parameter DISPLAY = "message" Functional Range ASCII 33 and ASCII 35 through 255, , Default N/A DISPLAY = "message" You can use any combination of characters available on the printer except for the quotation marks (ASCII 34) up to 16 characters in total including spaces or horizontal tab. Characters must be enclosed in double quotes. Example The following example shows how to display "LOAD C5 ENVELOPE" on the printer switch panel. %-12345X@PJL @PJL JOB NAME = "JOB C5 envelope" @PJL OPMSG DISPLAY = "LOAD C5 ENVELOPE" @PJL @PJL ENTER LANGUAGE = PCL E This is C5 EnvelopeE 8.4. STMSG Command With the STMSG command, you can display any message you like on the printer switch panel LCD. The printer will go off-line and stop printing until the operator presses the ON LINE key or resets the printer (Press SHIFT key and RESET key, then press SET key.) When the printer is put back to on-line by the operator, the printer returns a status message giving the name of the key. Syntax @PJL STMSG DISPLAY = "message" [] Return Syntax @PJL STMSG DISPLAY = "message" key CHAPTER 5 PJL - 79