Brother International HL-L2305W Command Reference Guide for Software Developer - Page 541
Pjl Set/default Mailboxprotect, Pjl Set/default Avoidmailboxfull
View all Brother International HL-L2305W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 541 highlights
3.1.2. PJL mailbox protection & bin number setting Format @PJL SET/DEFAULT MAILBOXPROTECT=TrayNumber Parameter TrayNumber Lower unit: #1 to 5 from bottom to top Lower unit + Upper unit: #1 to 10 from bottom to top #1 to 4 from bottom to top Default = 0 HL-L6300/L6400 series do not support this command. Explanation This command sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They cannot then be used for either stacker or sorter functions. If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and sorter functions. If the bin number is set out of the effective range, this command is ignored. Setting type Effective range MX not installed 0 Lower unit installed 0, 1 5 Lower & upper unit installed 0, 1 10 Setting type Effective range MX not installed 0 MX installed 0, 1 4 The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. 3.1.3. PJL avoidance of mailbox bin full Command @PJL SET/DEFAULT AVOIDMAILBOXFULL=ON/OFF Parameter ON/OFF OFF: Paper is ejected to the printer face-down output tray when the specified tray is full. ON: Paper is not ejected to the printer face-down output tray even when the specified tray is full. Default = OFF Explanation When paper is ejected into a bin specified by a setting command which limits the bin selection, this command selects whether to eject automatically paper to the printer face-down output tray or not when the specified bin is full. The difference between the SET and DEFAULT selection and the effective period of this setting follow the PJL specifications. APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 6