Brother International HL-L5200DWT Reference Guide - Page 13

Error Message, Cause, Action, No Paper Fed T4

Page 13 highlights

Error Message Jam 2-sided Jam Inside Jam MP Tray Jam Rear Jam Tray 1 Jam Tray 2 Jam Tray 3 Jam Tray 4 No Drum Unit No Paper No Paper Fed T2 No Paper Fed T3 No Paper Fed T4 No Paper MP Cause Action The paper is jammed in the Remove the 2-sided tray and open 2-sided tray or inside the the back cover to pull out all jammed back cover. paper. The paper is jammed inside Open the front cover, remove the the machine. toner cartridge and drum unit assembly, and pull out all jammed paper. Close the front cover. The paper is jammed in the Remove all jammed paper from in MP tray. and around the MP tray. Press Go. The paper is jammed in the Open the fuser cover and remove all back of the machine. jammed paper. Close the fuser cover. The paper is jammed in the Pull out the paper tray indicated on indicated paper tray. the LCD and remove all jammed paper. The drum unit is not installed correctly. The machine is out of paper, or paper is not loaded correctly in the paper tray. The machine failed to feed paper from the indicated paper tray. Reinstall the toner cartridge and drum unit assembly. • Refill paper in the paper tray. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. Pull out the paper tray indicated on the LCD and remove all jammed paper. The MP tray is out of paper, Do one of the following: or paper is not loaded correctly in the MP tray. • Refill paper in the MP tray. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

Error Message
Cause
Action
Jam 2-sided
The paper is jammed in the
2-sided tray or inside the
back cover.
Remove the 2-sided tray and open
the back cover to pull out all jammed
paper.
Jam Inside
The paper is jammed inside
the machine.
Open the front cover, remove the
toner cartridge and drum unit
assembly, and pull out all jammed
paper. Close the front cover.
Jam MP Tray
The paper is jammed in the
MP tray.
Remove all jammed paper from in
and around the MP tray. Press
Go
.
Jam Rear
The paper is jammed in the
back of the machine.
Open the fuser cover and remove all
jammed paper. Close the fuser cover.
Jam Tray 1
Jam Tray 2
Jam Tray 3
Jam Tray 4
The paper is jammed in the
indicated paper tray.
Pull out the paper tray indicated on
the LCD and remove all jammed
paper.
No Drum Unit
The drum unit is not
installed correctly.
Reinstall the toner cartridge and drum
unit assembly.
No Paper
The machine is out of
paper, or paper is not
loaded correctly in the
paper tray.
Refill paper in the paper tray. Make
sure the paper guides are set to
the correct size.
If paper is in the tray, remove it and
load it again. Make sure the paper
guides are set to the correct size.
Do not overfill the paper tray.
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4
The machine failed to feed
paper from the indicated
paper tray.
Pull out the paper tray indicated on
the LCD and remove all jammed
paper.
No Paper MP
The MP tray is out of paper,
or paper is not loaded
correctly in the MP tray.
Do one of the following:
Refill paper in the MP tray. Make
sure the paper guides are set to
the correct size.
If paper is in the tray, remove it and
load it again. Make sure the paper
guides are set to the correct size.
12