Brother International HL-L5200DWT Mobile Print/Scan Guide for Brother iPrint&a - Page 8

Home > Before Using AirPrint > Network Settings Network Settings In order to use AirPrint, your mobile device must connect to the wireless network to which your Brother machine is connected. AirPrint supports wireless connections that use Ad-Hoc mode, infrastructure mode, or Wi-Fi Direct®. To configure your mobile device for a wireless network, refer to your mobile device's user's guide. A link to your mobile device's user's guide on Apple's website can be found by tapping in Safari. To configure your Brother machine for a wireless network, see your Brother machine's Quick Setup Guide or Online User's Guide on your model's Manuals page on the Brother Solutions Center (support.brother.com). If your Brother machine supports a wired network, you can use a network cable to connect to the wireless access point/router. If your Brother machine supports Wi-Fi Direct® and you want to configure your Brother machine for a Wi-Fi Direct® network, see your Brother machine's Online User's Guide on your model's Manuals page on the Brother Solutions Center (support.brother.com). Ad-Hoc mode Connect your mobile device to your Brother machine without a wireless access point/router. 1 2 1. Mobile device 2. Wireless network machine (your Brother machine) If your mobile device is running iOS7.0.x, you must enable IPv6 for your Brother machine when using AirPrint in Ad-Hoc mode. Infrastructure mode Connect your mobile device to your Brother machine through a wireless access point/router. • When the Brother machine is connected to the wireless access point/router using the machine's wireless feature: 1 2 3 1. Mobile device 2. Wireless access point/router 4