Brother International HL-L8350CDW Command Reference Guide for Software Develop - Page 143
Using PCL Color Mode - Set PCL Color Setting
View all Brother International HL-L8350CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
2.2. Using PCL Color Mode - Set PCL Color Setting Command ESC*v#W (27)(42)(118)#(87) # # = 6, 18 # stands for the number of bytes of data that follow this command. This command sets the palette size and transformation between the entered value and device-specific value. This command has two types of format, short format and long format. Here are the formats for the PCL color setting. 1) Short Format MSB LSB 0 - 1 Format (0) Encoding mode 2 - 3 Bits / index Bits / value #1 4 - 5 Bits / value #2 Bits / value #3 ♣ Format This value must be 0. ♣ Encoding mode This value defines how to send the raster image data. The value can be from 0 to 3 only, other values are ignored. Encoding Mode 0 Send Index No by Plane * 1 Send Index No by Pixel 2 Send Direct Value by Plane 3 Send Direct Value by Pixel * = default Send Index No by Plane (= 0 default) This mode assigns the Index No. to the Plane, then sends it. The necessary number for the Plane is determined depending on the number of bits/index. 1 (one) plane should be needed per 1 (one) bit/index. For instance, 4 planes are needed for 4 bits/index. Bits/index must be 1, 2, 4, 5, 6, 7, 8. This mode sends the plane data except the last one using the Send Raster Data by Plane command (ESC*b#V). This mode also sends the last plane data using the Send Raster Data command (ESC*b#W). (i.e. 4 bits/index) ESC*b#V d1, d1, d1, d1, d1 ... Plane 1 ESC*b#V d2, d2, d2, d2, d2 ... Plane 2 ESC*b#V d3, d3, d3, d3, d3 ... Plane 3 ESC*b#W d4, d4, d4, d4, d4 ... Plane 4 ESC*b#V d1, d1, d1, d1, d1 ... Plane 1 ESC*b#V d2, d2, d2, d2, d2 ... Plane 2 1st raster 2nd raster MSB LSB Index No. d4 d3 d2 d1 ** The Italic characters shown above are the index No. at the 4th pixel in the 1st raster. CHAPTER 3 PCL5C - 5