Brother International HL-L8350CDW Command Reference Guide for Software Develop - Page 370
PW-Pen width, SM - Symbol mode, SP - Select pen, TL - Tick length
View all Brother International HL-L8350CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
PW-Pen width PW n[;] w ; width (unit = 1/300 inch) This command specifies the width of the currently selected pen. The value of w is an integer number from 1 to 10. SM - Symbol mode SM c[;] c ; ASCII character or symbol code The command specifies the symbol to be drawn. When the PA, PR, PD or PU instruction is used, the specified symbol will be drawn at the end of each vector. The specified symbol will be drawn at the end of each vector even if the pen is up when the PA or PR instructions are used. Omitting the parameter field cancels the symbol mode. 10 '*** SMEX *** 20 LPRINT "IN;SP1;SM*;PA500,1500;" 30 LPRINT "PD600,1590,670,1860,850,1960,1320,1900,1940,2350:" 40 LPRINT "PU;SM;PA500,500;SM3;" 50 LPRINT "PA550,800,680,720,800,950,1150,1230,1870,1350;PU;" 60 LPRINT "SM;PA1850,600;PD;SMY;PA3000,1450;" 70 LPRINT "SMZ;PA3300,1150;SMX;PA1850,600;PU;" 80 END SP - Select pen SP [ n ] [;] n ; Pen number Selects the pen specified by the pen number. The value for n must be an integer from 0 to 6. TL - Tick length TL l1(,l2)[;] 1-Length of ticks in the positive X- and Y-axes 2-Length of ticks in the negative X- and Y-axes Tick length is a percentage of the vertical and horizontal distances between P1 and P2. Sets the length of tick marks for the XT and YT instructions. Values for 1 and 2 are clamped real numbers. When the parameter field is omitted, the default values for tick length are used, for both l1 and l2, these are 0.5% of the horizontal and vertical distances between P1 and P2. 10 '*** TLEX *** 30 FOR I=1 TO 10 40 LPRINT "PR800,0;XT;" 50 NEXT I 60 LPRINT "TL;PU;PA300,279;PD;" 70 GOSUB 1000 80 LPRINT "TL1,0;PU;PA1100,279;PD;" 20 LPRINT "IN;PA300,279;SP2;PD;TL90;XT;"; 90 GOSUB 1000 100 LPRINT "TL0,5;PU;PA1900,279;" 110 GOSUB 1000 120 LPRINT "PA300,6759;TL80;YT;PU;" 130 END 1000 '* SUBROUTINE DRAW TICKS * 1010 FOR J=1 TO 8 1020 LPRINT "PRO,720;YT;" 1030 NEXT J 1040 RETURN CHAPTER 9 HP-GL - 19