Brother International HS-2500 Users Manual - English - Page 50
Blind Hem Stitching
View all Brother International HS-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
UTILITY STITCHES BLIND HEM STITCHING You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trousers, without the stitch showing. Pattern No. Stitch Width [mm (inch.)] Stitch Length [mm (inch.)] Stitch Name Application Auto Manual Auto Manual Pattern Presser Foot 70 stitches model 60 stitches model 50 stitches model 40 stitches model Twin Needle Walking Foot Reverse/ Reinforcement Stitching Blind hem stitch R 09 09 09 09 Blind hem stitching on medium weight fabrics 0 (0) -3 - 3 2.0 (1/16) 1.0-3.5 (1/16-1/8) No No * Rfc. R 10 10 10 10 Blind hem stitching on stretch fabrics 0 (0) -3 - 3 2.0 (1/16) 1.0-3.5 (1/16-1/8) No No * Rfc. *Rfc.: Reinforcement CAUTION ● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing. Memo ● When selecting stitch or . Stitch numbers "0", "-1", "-2" or "-3" may be displayed on the LCD by pressing "-" side of the stitch width adjustment key, then the needle drop point will be changed to the left. Stitch numbers "0", "1", "2" or "3" may be displayed on the LCD by pressing "+" side of the stitch width adjustment key, then the needle drop point will be changed to the right. ● When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not be achieved. Reverse the skirt or pants. a a Fold the fabric along the desired edge of the b hem, and press. b a Right side of fabric b Bottom side 1 2 1 2 1 2 a Wrong side of fabric b Right side of fabric 48