Brother International Innov-ís 1200 Users Manual - English - Page 29
Installing the bobbin
View all Brother International Innov-ís 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing the bobbin Insert the bobbin into the bobbin case so that d the thread unrolls to the left. Install the bobbin wound with thread. CAUTION ● Use a bobbin that has been correctly wound with thread, otherwise the needle may break or the thread tension will be incorrect. ● The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: SA156, SFB: XA5539-151). Actual size 11.5 mm (7/16 inch) This model Other model 1 • Be sure to insert the bobbin correctly. CAUTION ● Be sure to install the bobbin so that the thread unwinds in the correct direction, otherwise the thread may break or the thread tension will be incorrect. Memo z The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. Slide the bobbin cover latch to the right. a 1 2 a Bobbin cover b Latch X The bobbin cover opens. Remove the bobbin cover. b Hold the bobbin with your right hand and hold c the end of the thread with your left. Lightly hold down the bobbin with your right e hand, and then guide the thread as shown with your left hand. CAUTION ● When installing the bobbin, be sure to hold it down with your finger. If the bobbin is not correctly installed, the thread tension will be incorrect. • Be careful not to drop the bobbin. Winding/Installing the Bobbin 27