Brother International Innov-ís 1250D Users Manual - English - Page 35
and then pull it up.
View all Brother International Innov-ís 1250D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
While holding the thread lightly with your h right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. a Thread guide cover Pass the thread under the thread guide plate, i and then pull it up. Note z If the presser foot has been lowered and the shutter is closed, the machine cannot be threaded. Be sure to raise the presser foot and open the shutter before threading the 1 machine. In addition, before removing the upper thread, be sure to raise the presser foot and open the shutter. z This machine is equipped with a window that allows you to check the position of the take-up lever. Look through this window and check that the thread is correctly fed through the take-up lever. a Thread guide plate While using your right hand to lightly hold the j thread passed under the thread guide plate, pass the thread through the thread path in the order shown below. Pass the thread behind the needle bar thread k guide. The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand, as shown. a Shutter a Needle bar thread guide Next, use the needle threader to thread the needle. Continue with the procedure in "Threading the needle" (page 34). Upper Threading 33