Brother International Innov-is 6000D Operation Manual for Premium Pack I Optio - Page 13
Bobbin Work Free Motion Sewing, Operation Manual.
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
■ Finishing the thread ends a At the end of the stitching, pull the end of the bobbin thread up to the wrong side of the fabric. a Wrong side of fabric b Bobbin thread Note • If it is difficult to pull up the bobbin thread, use a ribbon embroidery needle to pull the thread up to the wrong side of the fabric. Otherwise, use an awl to pull up the bobbin thread. b From the wrong side of the fabric, tie the bobbin thread and the upper thread together by hand, and then cut off excess threads with scissors. Bobbin Work Free Motion Sewing ■ For bobbin work free motion sewing use the instructions for "CREATING BOBBIN WORK (SEWING)" beginning on page 10. ■ For information about using the free motion quilting foot "C", free motion open toe quilting foot "O", or free motion echo quilting foot "E" refer to "Free Motion Quilting" located in the machine's Operation Manual. ■ If so desired, use a template or draw your design on the stabilizer to allow for ease of stitching. Remember, your stitches with your decorative thread will be on the underneath side of your fabric and the stabilizer will be on the top of the wrong side of your fabric. a Wrong side of fabric b Surface of fabric Note • To ensure threads do not come undone after being tied place a drop of fabric glue on knots. c If the desired results could not be achieved, adjust the tension of the bobbin thread and of the upper thread, and then try sewing the stitching again. For more details, refer to "ADJUSTING THE THREAD TENSION" on page 17. 12