Brother International Innov-is 6000D Operation Manual for Premium Pack I Optio - Page 25
Select how to change the pattern size., Press, Depending on the pattern, the stitching may
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
f Select how to change the pattern size. g Press . h Press . Note • Depending on the pattern, embroidering may not be possible at the appropriate thread density. Before sewing on your project, be sure to sew trial embroidery on a piece of scrap fabric that is the same as the fabric used in the project using the same needle and embroidery thread. • If the pattern is enlarged and there is space between stitches, a better effect can be achieved by increasing the thread density. • If the pattern is reduced and the stitching is too thick, a better effect can be achieved by reducing the thread density. * Press * Press * Press * Press * Press * Press * Press to enlarge the pattern proportionately. to shrink the pattern proportionately. to stretch the pattern horizontally. to compact the pattern horizontally. to stretch the pattern vertically. to compact the pattern vertically. to return the pattern to its original appearance. Memo • With the density scale bar, the thread density can be changed. A setting between 80% and 120% in 5% increments can be specified. CAUTION • Depending on the pattern, the stitching may become entangled or the needle may break when the pattern is reduced. If this occurs, slightly enlarge the pattern. * Press * Press to make the pattern less dense. to make the pattern more dense. 24