Brother International Innov-is 6000D Operation Manual for Premium Pack IV Opti - Page 5
Adjusting the LED Pointer, Press, twice to return to the original, screen.
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Memo • When the LED pointer is turned on, the presser foot height is automatically adjusted according to the fabric thickness. • If is pressed again, the fabric thickness is remeasured and the presser foot is set to the optimum height. • If the embroidery foot "W2" is not attached, appears in gray. * The LED pointer turns off automatically by lowering the presser foot or returning to the previous page. Note • With thick elastic fabric, the position will be misaligned only at raised parts in the fabric. In this case, manually adjust the position according to the thickness of the fabric. • With fabric that has a very uneven surface such as quilting, the position is not correctly aligned. In this case, the pointer indication should be used only as a reference. c Display page 8 of the Embroidery settings screen. Adjusting the LED Pointer Adjust the LED pointer if it indicates a point different than the actual needle drop point. Before adjusting the LED pointer, mark the actual needle drop point on the fabric to be embroidered, and then hoop the fabric and attach the embroidery frame. a Press . → The settings screen appears. b Press . → The Embroidery settings screen appears. Memo • When using the "Embroidery" or "Embroidery Edit", touch to directly access the Embroidery settings screen. d Press . → The Embroidery Foot "W2" with LED Pointer Adjustment screen appears. a a LED pointer adjustment Note • The specified setting is saved in the machine's memory. This is useful for positioning during continuous embroidering. • For normal use, return the setting to "00". e Use or to adjust the LED pointer so that it indicates the actual needle drop point. f Press screen. twice to return to the original 4