Brother International Innov-is NQ700PRW Operation Manual - Page 110
Basic sewing
View all Brother International Innov-is NQ700PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Sewing the Various Built-in Decorative Patterns Basic sewing a Select a decorative/character stitch pattern. b Attach monogramming foot "N". c Place the fabric under thread out to the side, the presser foot, pull the upper press (Needle position button) to lower needle into fabric and then lower the presser foot. Memo • When sewing character stitches, the machine automatically sews reinforcement stitches at the beginning and end of each character. • When sewing is completed, trim any excess thread between letters. d Press the "Start/Stop" button to begin sewing. CAUTION • When sewing 7 mm satin stitch patterns and the stitches are bunched, lengthen the stitch length. If you continue sewing when the stitches are bunched, the needle may bend or break. For details on adjusting the stitch length, refer to "Setting the stitch length" in the "Basic operations" section. Memo • If the fabric is pulled or pushed during sewing, the pattern may not turn out correctly. Also, depending on the pattern, there may be movement to the left and right as well as front and back. Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. e Press the "Start/Stop" button to stop sewing. f Press stitch (Reverse stitch button) or button) to sew reinforcement (Reinforcement stitches. Note • When sewing some patterns, the needle will temporarily pause in the raised position while the fabric is fed due to the operation of the needle bar separation mechanism which is used in this machine. At such times, a clicking sound different from the sound generated during sewing will be heard. This sound is normal and is not the sign of a malfunction. D-4