Brother International IntelliFax-2840 Advanced Users Guide - English - Page 11
Deep Sleep mode, Toner Settings, Toner Setting (Continue mode), Continue mode - replace toner
View all Brother International IntelliFax-2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Deep Sleep mode 1 If the machine is in Sleep mode and does not receive any jobs for a certain length of time, the machine will automatically enter Deep Sleep mode, and the LCD will show Deep Sleep. Deep Sleep mode uses less power than Sleep mode. The machine will wake up and start warming up when the machine receives computer data or when you press a key on the control panel. Lifting or replacing the handset will also wake up the machine from Deep Sleep mode. General Setup Toner Settings 1 Toner Setting 1 (Continue mode) 1 You can set the machine to continue printing after the LCD shows Replace Toner. The machine will continue printing until the LCD shows Toner Ended. The default setting is Stop. a Press Menu, 1, 7. General Setup 7.Replace Toner b Press a or b to choose Continue or Stop. Press OK. c Press Stop/Exit. Note • If you continue printing in the Continue mode, we cannot guarantee the print quality. • While using Continue mode the print may appear faint. • After replacing the toner cartridge with a new one, the Continue mode will go back to the default setting (Stop). 5