Brother International IntelliFax-2840 Advanced Users Guide - English - Page 12
Receiving faxes in Continue mode, Toner End in Continue mode, LCD Contrast
View all Brother International IntelliFax-2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 1 Receiving faxes in Continue mode 1 The machine can store received faxes in the memory if you choose Continue mode when the LCD shows Replace Toner. When received faxes are printed in Continue mode the LCD will ask if the print quality of the fax is OK. If the quality is not good, choose 2.No. The machine will keep the faxes stored in the memory so you can reprint them after you replace the toner cartridge with a new one. If the print quality is good, choose 1.Yes. The LCD will ask if you want to delete the printed faxes from the memory. If you choose not to delete them, you will be asked again after you replace the toner cartridge with a new one. Note • The FAX-2840 and MFC-7240 can store up to 400 faxes in memory and the FAX2940 can store up to 500 faxes in memory. • (FAX-2840 and MFC-7240) If you turn off the power switch faxes in memory will be lost. • The machine will keep faxes stored in Continue mode even if you change the Continue setting to Stop. • If you install a new toner cartridge when the LCD shows Toner Ended, the machine will ask if you want to print the stored faxes. Choose 1.Print to print stored faxes. Toner End in Continue mode 1 When the LCD shows Toner Ended the machine will stop printing. If the memory is full and you want to continue receiving faxes, you must install a new toner cartridge. LCD Contrast 1 You can change the contrast to make the LCD look lighter or darker. a Press Menu, 1, 5. General Setup 5.LCD Contrast b Press c to make the LCD darker. Or, press d to make the LCD lighter. Press OK. c Press Stop/Exit. 6