Brother International IntelliFax-2920 Users Manual - English - Page 93
Start, ERROR MESSAGES, CAUSE, ACTION, Unable to Init., Wrong Paper Size - unable to print
View all Brother International IntelliFax-2920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 11 ERROR MESSAGES ERROR MESSAGE CAUSE Unable to Init. The machine has a mechanical (Initialize) problem. Unable to Print Unable to Scan Wrong Paper Size Paper is not the correct size. ACTION (For FAX-2820, FAX-2910 and MFC-7220) When you turn off the machine's power switch its memory will be cleared. To check whether the machine has faxes in its memory see Checking if the machine has faxes in its memory on page 11-6. If there are faxes you need to save them before following the suggestions below (To save the faxes, see Forwarding faxes to another fax machine on page 11-6. For MFC-7220 also see Transferring faxes to your PC (MFC-7220 and MFC-7225N only) on page 11-6). Turn off the machine's power switch and then turn it on again. If the error message continues, leave the machine for several minutes and try it again. (For FAX-2920 and MFC-7225N) Turn off the machine's power switch and then turn it on again. If the error message continues leave the machine for several minutes and then try it again. (The machine can be turned off for up to 4 days without losing faxes stored in the memory.) Load the correct size of paper (Letter, Legal or A4) and then press Start. 11 - 5