Brother International KE-436C Programmer Instruction Manual - English - Page 136
Basting
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Basting Chapter 3 Programming with Command Function Basting is programmed. The example in the le in the left is used for explanation of basting programming from point C to point F. Programming 1. Press . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Repeat step 2 and create the program to point C. 4. Input point C and press . Input the basting command. 5. Move the work clamp with . Press when the needle point is at point D of the pattern. 6. Repeat steps 4 and 5 and create the program to point F. 7. Create the program to points G and H as in step 2. Programmer 135
Programmer
135
Chapter 3 Programming with Command Function
Basting
Basting is programmed. The example in the le in the left is
used for explanation of basting programming from point C to
point F.
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3.
Repeat step 2 and create the program to point
C.
4.
Input point C and press
.
Input the basting command.
5.
Move the work clamp with
. Press
when the needle point is at point D of the
pattern.
6.
Repeat steps 4 and 5 and create the program to
point F.
7.
Create the program to points G and H as in step
2.